...
To run the manual calibration procedure, you need to have detector at least configured once (Firmware/ASIC configuration). If you ran this previously, skip this step. If not, do the following stepYou may want to always run this command to set these values to default.
Firmware/ASIC configuration: Open the Rogue interface, and In the InitASIC list, type [4,1,1,1,1] and hit enter. This will not configure the Silabs PLL, and use the default configuration with clock of 168Mhz and configure all ASICs with default.
...
Example: In the image above, Lanes 16, 22, and 23 seem dead.
Snapshot of values obtained automatically vs manual (Carrier 2, digital C00-01)
...
AFter documenting, delete the file ((namely all_errorsX.csv, delay_spaceX.csv, run_resultsX.csv, and delay_spaceX.csv where X is 0 to 3)) using the following command:
>
| Code Block |
|---|
rm *.csv (in the /scripts folder)
|
When you are done with this function, run ">init ASIC" for clean up
| Expand |
|---|
| title | SspMonGrp[0] (ASIC0) (automatic) |
|---|
|
SspMonGrp[0]:
enable: True
LockedCnt[0]: 0x0
LockedCnt[1]: 0x4
LockedCnt[2]: 0x2
LockedCnt[3]: 0x2
LockedCnt[4]: 0x3
LockedCnt[5]: 0x4
LockedCnt[6]: 0x2
LockedCnt[7]: 0x2
LockedCnt[8]: 0x3
LockedCnt[9]: 0x4
LockedCnt[10]: 0x2
LockedCnt[11]: 0x3
LockedCnt[12]: 0x3
LockedCnt[13]: 0x3
LockedCnt[14]: 0x2
LockedCnt[15]: 0x2
LockedCnt[16]: 0x3
LockedCnt[17]: 0x4
LockedCnt[18]: 0x2
LockedCnt[19]: 0x3
LockedCnt[20]: 0x3
LockedCnt[21]: 0x4
LockedCnt[22]: 0x2
LockedCnt[23]: 0x3
BitSlipCnt[0]: 0x2c2d
BitSlipCnt[1]: 0x2c3f
BitSlipCnt[2]: 0x2c2a
BitSlipCnt[3]: 0x2c27
BitSlipCnt[4]: 0x2c31
BitSlipCnt[5]: 0x2c2d
BitSlipCnt[6]: 0x2c28
BitSlipCnt[7]: 0x2c2e
BitSlipCnt[8]: 0x2c27
BitSlipCnt[9]: 0x2c3b
BitSlipCnt[10]: 0x2c28
BitSlipCnt[11]: 0x2c2c
BitSlipCnt[12]: 0x2c39
BitSlipCnt[13]: 0x2c3c
BitSlipCnt[14]: 0x2c2c
BitSlipCnt[15]: 0x2c2a
BitSlipCnt[16]: 0x2c3b
BitSlipCnt[17]: 0x2c2b
BitSlipCnt[18]: 0x2c2a
BitSlipCnt[19]: 0x2c26
BitSlipCnt[20]: 0x2c17
BitSlipCnt[21]: 0x2c27
BitSlipCnt[22]: 0x2c2a
BitSlipCnt[23]: 0x2c2a
ErrorDetCnt[0]: 0xffff
ErrorDetCnt[1]: 0xffff
ErrorDetCnt[2]: 0xffff
ErrorDetCnt[3]: 0xffff
ErrorDetCnt[4]: 0xffff
ErrorDetCnt[5]: 0xffff
ErrorDetCnt[6]: 0xffff
ErrorDetCnt[7]: 0xffff
ErrorDetCnt[8]: 0xffff
ErrorDetCnt[9]: 0xffff
ErrorDetCnt[10]: 0xffff
ErrorDetCnt[11]: 0xffff
ErrorDetCnt[12]: 0xffff
ErrorDetCnt[13]: 0xffff
ErrorDetCnt[14]: 0xffff
ErrorDetCnt[15]: 0xffff
ErrorDetCnt[16]: 0xffff
ErrorDetCnt[17]: 0xffff
ErrorDetCnt[18]: 0xffff
ErrorDetCnt[19]: 0xffff
ErrorDetCnt[20]: 0xffff
ErrorDetCnt[21]: 0xffff
ErrorDetCnt[22]: 0xffff
ErrorDetCnt[23]: 0xffff
EyeWidth[0]: 0xff
EyeWidth[1]: 0xff
EyeWidth[2]: 0xff
EyeWidth[3]: 0xff
EyeWidth[4]: 0xff
EyeWidth[5]: 0xff
EyeWidth[6]: 0xff
EyeWidth[7]: 0xff
EyeWidth[8]: 0xff
EyeWidth[9]: 0xff
EyeWidth[10]: 0xff
EyeWidth[11]: 0xff
EyeWidth[12]: 0xff
EyeWidth[13]: 0xc0
EyeWidth[14]: 0xff
EyeWidth[15]: 0xff
EyeWidth[16]: 0xff
EyeWidth[17]: 0xff
EyeWidth[18]: 0xff
EyeWidth[19]: 0xff
EyeWidth[20]: 0xff
EyeWidth[21]: 0xff
EyeWidth[22]: 0xff
EyeWidth[23]: 0xff
Locked: 0xffffff
UsrDlyCfg[0]: 0xdb
UsrDlyCfg[1]: 0xdb
UsrDlyCfg[2]: 0xdb
UsrDlyCfg[3]: 0xdb
UsrDlyCfg[4]: 0xdb
UsrDlyCfg[5]: 0xdb
UsrDlyCfg[6]: 0xdb
UsrDlyCfg[7]: 0xdb
UsrDlyCfg[8]: 0xdb
UsrDlyCfg[9]: 0xdb
UsrDlyCfg[10]: 0xdb
UsrDlyCfg[11]: 0xdb
UsrDlyCfg[12]: 0xdb
UsrDlyCfg[13]: 0xdb
UsrDlyCfg[14]: 0xdb
UsrDlyCfg[15]: 0xdb
UsrDlyCfg[16]: 0xdb
UsrDlyCfg[17]: 0xdb
UsrDlyCfg[18]: 0xdb
UsrDlyCfg[19]: 0xdb
UsrDlyCfg[20]: 0xdb
UsrDlyCfg[21]: 0xdb
UsrDlyCfg[22]: 0xdb
UsrDlyCfg[23]: 0xdb
DlyConfig[0]: 0x7f
DlyConfig[1]: 0x17b
DlyConfig[2]: 0xfc
DlyConfig[3]: 0x7f
DlyConfig[4]: 0x7f
DlyConfig[5]: 0x178
DlyConfig[6]: 0x8c
DlyConfig[7]: 0x11c
DlyConfig[8]: 0x7f
DlyConfig[9]: 0x168
DlyConfig[10]: 0xe8
DlyConfig[11]: 0x14f
DlyConfig[12]: 0x7f
DlyConfig[13]: 0x63
DlyConfig[14]: 0x94
DlyConfig[15]: 0x117
DlyConfig[16]: 0x7f
DlyConfig[17]: 0xb9
DlyConfig[18]: 0x92
DlyConfig[19]: 0x111
DlyConfig[20]: 0x7f
DlyConfig[21]: 0x113
DlyConfig[22]: 0x7f
DlyConfig[23]: 0xc5
DATA_WIDTH_G: 16
NUM_LANE_G: 24
EnUsrDlyCfg: 0x0
MinEyeWidth: 0x50
LockingCntCfg: 0xffff
BypFirstBerDet: 0x1
Polarity: 0x0
GearboxSlaveBitOrder: 0x0
GearboxMasterBitOrder: 0x0
MaskOffCodeErr: 0x0
MaskOffDispErr: 0x0
MaskOffOutOfSync: 0x0
IdleCode: 0xffffff
LockOnIdleOnly: 0x0
RollOverEn: 0x0 |
...
