Page History

...

Here's the instructions for updating the PCIe card:
https://github.com/slaclab/lcls2-pcie-apps/tree/lcls2-pgp-fw-lib-updatemaster/software/TimeTool#how-to-reprogram-the-pcie-firmware-via-rogue-softwareHere's the latest FEB board image:
https://github.com/slaclab/cameralink-gateway/blob/master/firmware/targets/ClinkFebPgp2b_1ch/images/ClinkFebPgp2b_1ch-0x00000025-20190315182526-ruckman-af9cde50.mcs

Here's the instructions for updating the FEB board:
https://github.com/slaclab/lcls2-pcie-apps/tree/lcls2-pgp-fw-lib-updatemaster/software/TimeTool#how-to-reprogram-the-feb-firmware-via-rogue-software

Here's the configurations that I used in my testing (standalone LCLS-I timing with 120Hz fiber triggering):
https://github.com/slaclab/lcls2-pcie-apps/blob/lcls2-pgp-fw-lib-updatemaster/software/TimeTool/config/defaults.yml

Here are the instructions for running the SW/FW co-simulation using Rogue + VCS:
https://github.com/slaclab/lcls2-pcie-apps/tree/lcls2-pgp-fw-lib-updatemaster/software/TimeTool#how-to-run-the-rogue-pyqt-gui-with-vcs-firmware-simulator

_____________________

re-syncing

...