Page History

LCLS Control System Instrumentation Hardware

Inventory

Spares

Manuals

• More...

...

• SLC Hardware Manual

Industrial PC

• IPMI command
• LCLS-II Generic IPMI Command Wrappers

ATCA

• SLAC ATCA Modules
• ATCA Shelf Manager Crate ID Naming Convention
• ATCA Cheat Sheets
• How-to Setup an ATCA CrateID
• How-to download ATCA subsystem application firmware on a carrier board FPGA
• How-to install an ATCA Carrier into an ATCA Crate
• How-to Setup your ATCA Crate and LinuxRT CPU
• How-to Configure an ATCA 9112
• How-to configure an ATCA Advantech Switch in a 7-slot ATCA Crate
• ATCA Network Switch Test Harness
• ATCA Configuration: How-to access from the network
• ATCA 9112: How-to check the status and enable ports
• ATCA 9112: How-to upgrade the LMP firmware to version 5.0.2
• ATCA ETH Switch
• ATCA Commands
• FEB ATCA Concept
• ATCA Commercial hardware specifications for procurement

VME Crates

• How to Configure Hybricon and Elma Crates
• Troubleshooting

...

• Cheetsheet for Reflashing RTEMS IOC
• RTEMS command to get MAC Address -  rtems_bsdnet_show_if_stats()
• RTEMS nvramConfig information
  • from $IOC_DATA
    • if IOC is booting via nvram: $IOC_DATA/<ioc>/iocInfo/IOC.nvramConfig
    • if IOC is booting via dhcp:    $IOC_DATA/<ioc>/iocInfo/IOC.bootConfig
  • IOC nvram:
    • iocConsole <ioc>
    • nvramConfigShow()
    • ctrl-a d
  • DHCPD.confg
• Configure RTEMS NVRAM Boot Parameter Cheetsheet
  • Coldfile NVRAM boot parameters
  • MVME6100/5500/3100 NVRAM boot parameters
    • Production (lcsca subnet)
      • Prod rtems-4.9.3
      • Prod rtems-4.9.1
    • Development (lclsdev subnet)
      • Dev (AFS) rtems-4.9.1
      • Dev (NFS) rtems-4.7.1
    • Setting NIC Speed

...

Remotely Controllable Power Strips (ACSW) and UPSs

MicroTCA

Thuy's page

Equipment Racks

• Cable Plant
• Cable Shop Job Orders
• Captar
• SLAC Drawings
• DEPOT - SLAC Inventory Database
• Facilities Request

Subsystem Electromagnetic Interference Sources