THESE INSTRUCTIONS MAY BE OUTDATED.

TALK TO PELLE IF YOU NEED EXACT WORKING COMMANDS.

SVT Monitoring

Log into 'clonioc1clonioc4' (requires access through gateway).

ssh hallgw
ssh clonioc1

Start GUIs

hpsrun@clonioc1
hps_epics dev # pull up the screens that are relevant
 

SVT IOC Control

MPOD IOC

Log into 'clonioc1' (requires access through gateway).

ssh clonioc1
cd /usr/clas12/hps/dev/
source .setup-hps
cd utils
./start_svt_guis.sh

...

 
# Use procServMgr to control the IOC
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iochvCaen [status|start|stop]
 
# Monitor output (to check if commands get through the IOC for example)
telnet localhost port # you can find the 'port' from the status command above
 
# while in monitor mode:
# If you type 'Cntrl-X' the IOC will stop and restart automatically
# You can type 'Cntr-]' to get telnet prompt (and e.g. 'quit' to exit form there).  

SVT Hybrid and DAQ IOC

...

Log into 'clonioc1clonioc4' (requires access through gateway).

Code Block
language bash
ssh hallgw ssh clonioc1

 

Control  IOCs (if not running!):

Code Block
language bash
epics@clonioc4 #default passw cd /usr/clas12/hps/dev/ source .setup-hps cd utils ./control_svt_dpm.py -a status|start|stop [-t] [dpmX|dtmY|cntrldpm] # if no args given, all are affected. # to monitor in xterms # Use procServMgr to control the IOC procServMgr -p /usr/clas12/hps/dev/apps/iocBoot [-i IOC_NAME] [status|start|stop] # Examples:    # start/stop/status for all SVT DAQ IOCs: procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status/start/stop # Control DPMIOC only: procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status/start/stop -i iocsvtDaq status/start/stop # Data DPM "X" (X=0-13) IOC only: procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status/start/stop -i iocsvtDaqDpmX status/start/stop # Bring up the IOC stdout for all or individual SVT DAQ IOCs cd /usr/clas12/hps/dev/apps/svtDaqApp/scripts ./start_svt_mon.py -h [dpmX|dtmY|cntrldpm] # 'X'=0-13 and 'Y'=0-1

If everything fails try to use the below standard procServMgr scripts:

Code Block
language bash
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status/start/stop

 

If the IOC refuses to stop or start, the process might be stuck and you manually have to kill the IOCs before you restart.

If that fails, call Pelle.

Official IOC instructions

...