Page History

...

drp-srcf-cmpNNN	KCU firmware	Comment	Application (Oct 17, 2022)
001	DrpTDet	TMO low rate, XTCAV nic (SXR, cpo believes)	slow tmo tdet (+xtcav (SXR, cpo believes))
002	DrpTDet	RIX low rate, encoder nic	slow rix tdet (+mono)
003	DrpTDet	TMO high rate	tmo high rate tdet
004	XilinxKcu1500Pgp4_6Gbps_ddr		rix/tmo wave8 Collection host
005	DrpPgpIlv		rix hsd's
006	ClinkKcu1500Pgp2b	LCLSECSD-1844. Possibly repaired spare camlink?	spare camlink node?nothing
007	ClinkKcu1500Pgp2b		tmo fzp piranha
008	DrpTDet	didn't show up on xpm	rix user meb
009	DrpPgpIlv		rix hsd's
010	DrpTDet	RIX high rate	rix fast tdet
011	ClinkKcu1500Pgp2b		tmo fzp opal
012	ClinkKcu1500Pgp2b		~~tmo opal1~~ rix piranha
013	ClinkKcu1500Pgp2b		tmo atm piranha
014	Lcls2EpixHrXilinxKcu1500Pgp4_6Gbps		epix hr
015		No mlx5; Bad Ethernet LCLSECSD-1305 Unreliable machine: bad for TEB / MEB	nothing
016	DrpTDet	No mlx5. Error messages LCLSECSD-1305 Unreliable machine: bad for TEB / MEB	nothing
017	DrpPgpIlv		tmo hsd_3
018	DrpPgpIlv		tmo hsd_5,hsd_7
019	DrpPgpIlv		tmo hsd_4,hsd_13
020	DrpPgpIlv		tmo hsd_2
021	DrpPgpIlv		tmo hsd_6
022	DrpPgpIlv		tmo hsd_8,hsd_9
023	DrpPgpIlv		peppex hsd's
024	DrpPgpIlv		tmo hsd_10,hsd_11
025	DrpTDet		rix slow tdet
026	ClinkKcu1500Pgp2b		tmo atm opal
027	ClinkKcu1500Pgp2b		rix atm opal
028	DrpTDet	XPM:6	tmo ami
029	DrpTDet	XPM:5	rix ami
030	DrpTDet	NC	tmo user meb
031	XilinxKcu1500Pgp4_6Gbps_ddr	LCLSECSD-2030: BIOS not upgradable	tmo user meb
032	DrpTDet	~~XPM:7~~ (hacked with fiber from xpm0 that was in cmp037). Web IPMI interface broken. Update bios settings: only one pcie bus.	LCLS1 HXR hutches
033	DrpTDet	XPM:0. update bios settings: only one pcie bus.
034	DrpTDet	XPM:0	mona slurm tests
035	DrpTDet	XPM:0; LCLSECSD-2032: BIOS not upgradable from v2.0 but is useable as-is	EpixHrEmumona slurm tests
036	DrpTDet	XPM:0	epixM data	epixMEpixHrEmu
037	DrpTDet	~~XPM:0~~ (hacked with fiber from xpm7)
038	DrpTDet	used in the spare project XPM:07
039	DrpTDet	LCLSECSD-2028: Broken IPMI
040	DrpTDet	XilinxKcu1500Pgp4_6Gbps	used in the spare project XPM:0
041	DrpTDetLcls2XilinxKcu1500Pgp2b	used in the spare project XPM:0
042	DrpTDetDrpPgpIlv	used in the spare project XPM:0
043	DrpTDet	XPM:0	EpixHrEmu
044	DrpTDet	XPM:0	Laser hall
045	Todo: XilinxKcu1500Pgp4_6Gbps	XPM:0	TXI Wave8
mon001			tmo tcmp03mo meb and ami_manager neh-base.cnf, hsd.cnf, rix-hsd.cnf

Cabling

Top Patch Panel:

NOTE: the rightmost MPO connections are MPO12 (2 rows, 4 columns). The left ones are MPO8. We should use MPO8 for KCU. The MPO12 are reserved for "future expansion" (can be converted to MPO8, I think).


046	DrpPgpIlv		TMO HSD_15 and TMO HSD_16
048	DrpPgpIlv		TMO HSD_17 and TMO HSD_18
049	DrpPgpIlv	not working, possibly defective KCU
050	DrpPgpIlv		TMO HSD_01 and TMO HSD_19
051
052
053
054
055

drp-srcf-gpuNNN	KCU firmware	Comment
001	in progress	Adding kcu1500
002	n/a
003	n/a
004	n/a

Cabling

Top Patch Panel:

NOTE: the rightmost MPO connections are MPO12 (2 rows, 4 columns). The left ones are MPO8. We should use MPO8 for KCU. The MPO12 are reserved for "future expansion" (can be converted to MPO8, I think).

cmp006 (timing) (close to the

(6-strand breakout cable)
1: gpu001 (away from usb port)
2: cmp040 (away from usb port)
3: cmp041 (away from usb port)
4: cmp042 (away from usb port)
5: cmp043 (away from usb port)
6: cmp044 (away from usb port)

DON'USE FOR NOW

DON'T USE FOR NOW

(6-strand breakout cable)
1: cmp038 (away from usb port)
2: cmp040 (away from usb port)
3: cmp041 (away from usb port)
4: cmp042 (away from usb port)
5: cmp043 (away from usb port)
6: cmp044 (away from usb port)

DON'USE FOR NOW

DON'T USE FOR NOW

(breakout cable)

1: cmp022(away from USB port)

2: cmp022(close to USB port)

3: cmp023 (away from USB port)

4: cmp023 (close to USB port)

(breakout cable)

1: cmp018(away from USB port)

2: cmp018(close to USB port)

3: cmp019 (away from USB port)

4: cmp019 (close to USB port)

(breakout cable)

1: cmp009(away from USB port)

2: cmp009(close to USB port)

3: cmp017 (away from USB port)

4: cmp017 (close to USB port)

(breakout cable)

1: cmp008

2: cmp010

3: cmp016

4: cmp025

this connection is presumably been moved from the last one of this row (RM)

(

break

breakout cable)

1:

cmp033

cmp022(away from

usb

USB port)

2:

cmp035 (away from usb

cmp022(close to USB port)

3:

cmp036

cmp023 (away from

usb

USB port)

4:

cmp037 (away from usb

cmp023 (close to USB port)

(breakout cabelcable)

1: cmp046 (close to usb)

2:

3: cmp019 cmp046 (away from usbUSB port)

34: cmp48 cmp019 (close to usbUSB port)4: cmp048

(away from usb)(breakout cable)

1: cmp024cmp009(away from USB port)

2: cmp024cmp009(close to USB port)

3: -cmp017 (away from USB port)

4: -cmp017 (close to USB port)

(breakout cable)

(break cable)
1: cmp020cmp033 (away from USB usb port)
2: cmp020(close to USB cmp035 (away from usb port)
3: cmp021 cmp036 (away from USB usb port)
4: cmp021 (close to USB cmp032 (away from usb port)

(breakout cable)

1: cmp029

2: cmp030cmp046 (away from usb)
3: cmp032cmp048 (close to usb)
4: -cmp048 (away from usb)

(breakout cable)

1: cmp028cmp024(away from USB port)

2: -cmp024(close to USB port)

3: -

4: -

Bottom Patch Panel (MPO):

cmp011 (timing) ( the cmp012 timing) (close to the cmp004 usb cmp013(timing) (close to the cmp026(timing) ( the cmp027timing) (close to the USB port)

cmp018(away from USB port)

4: -cmp018(close to

USB port)

(

breakout cable)

1: cmp020(away from USB port)

2: cmp020(close to

USB port)

3: cmp021 (away from USB port)

4: cmp021 (close to

USB port)

(

cmp004(away from usb port)

cmp006 (data) (away from USB port)

cmp011 (data) (away from USB port)

cmp012 (data) (away from USB port)

cmp013 (data) (away from USB port)

cmp045 (away from USB port)

cmp026 (data) (away from USB port)

cmp027 (data) (away from USB port)

cmp014(away from usb port)

Bottom Patch Panel (LC):

breakout cable)

1: cmp029

2: cmp030

3: cmp037

4: cmp038

(breakout cable)

1: cmp028

2: -

3: -

4: -

(breakout cable)
1: cmp050(away from the usb)
2: cmp050(close to usb)
3: cmp046 (close to usb)

Bottom Patch Panel (MPO):

cmp007 cmp001 (away from

cmp006 (timing) (close to the USB port)	cmp011 (timing) (close to the USB port)	cmp012 (timing) (close to the USB port)	cmp004(close to usb port)	cmp013(timing)	IT	IT	(close to the USB port)	cmp026(timing) (close to the USB port)	IT	cmp027(timing) (close to the USB port)	cmp004(away from usb port)
cmp006 (data) (away from cmp007 (away from the USB port)	cmp002 cmp011 (data) (away from the USB port)	IT	cmp012 (data) (away from USB port)	cmp013 (data) cmp003 (away from the USB port)	IT	cmp045 (away from USB port)	cmp026 (data) (away from cmp005 (close to the USB port)	IT	cmp005 (awy from the cmp027 (data) (away from USB port)	IT

...

Fibers 15-16: XTCAV from Room 208 Rack 2 PH2 fibers 61-62 → cmp001

Fibers 21-22: MonoEncoder from ACTA Switch in FEE → cmp002

TMO Hutch Fiber Connections

...

cmp014(away from usb port)

Bottom Patch Panel (LC):

IT	IT	cmp007 (close to the USB port)	cmp001 (away from the USB port)
	IT	cmp007 (away from the USB port)	cmp002 (away from the USB port)
	IT		cmp003 (away from the USB port)
	IT		cmp005 (close to the USB port)
	IT		cmp005 (awy from the USB port)
	IT

LC

Fibers 15-16: XTCAV (SXR, cpo believes) from Room 208 Rack 2 PH2 fibers 61-62 → cmp001. 61/62 means sixth cassette from the left, top fiber.

Fibers 21-22: MonoEncoder from ATCA Switch in FEE → cmp002

TMO

...

Hutch Fiber Connections

Source	Destination	Notes
XPM 3 network connection2 input on RTM	Rack 4 in TMO hutch, FODU2, Cassette 4, fibers 3-4 (a.k.a TMO2.4.3-4)	Note that cassettes 3 and 4 are swapped between rack 3/4
XPM 2 network connection	Rack 3, Cassette 3, fibers 23-24, goes to Rack 4 FODU 5, Cassette 4, fibers 23-24, goes to Rack 4 FODU 2 cassette 4 fibers 5-6	Note that cassettes 3 and 4 are swapped between rack 3/4

RIX Hutch Fiber Connections

Source	Destination	Notes
XPM 3 network connection	Rack 1 FODU Cassette 1 fibers 15-16	Don't immediately know what the official fodu number is
XPM 3 AMC1 port 5 counting from 0	Room 208 RIX1 fodu, cassette 1 fibers 11-12	Wasn't connected	Rack 1 FODU Cassette 1 fibers 15-16	Don't immediately know what the official fodu number is	XPM 3 AMC1 port 5 counting from 0	Room 208 RIX1 fodu, cassette 1 fibers 11-12	Wasn't connected on the room 208 side on Oct. 26, 2022. Maybe not necessary any more?

...

MFX Hutch Fiber Connections

See FEE Alcove Fiber Cabling for description of which patch panel in 208 goes to which detector. Note that the fiber numbering on that page is different from here. On the FEE alcove page we number fibers left-to-right, then top-to-bottom. Here we use a better scheme: using the actual fiber numbers marked on the cassettes. We should convert the FEE-alcove page to use the better fiber-numbering scheme.

Source	Destination	Notes
BOS 1.8.1, 1.8.2 and XPM7 output	Building B950 RB02 in room 208: SM S04 To B999 MEZZ FODU 43 R11, Ports 1,2,4	3 fiber pairs for epixHR data (two pairs) and timing (one pair)

XTCAV Fiber Route

SXR

From Matt: I tried to look up the exact path of the xtcav fiber, but couldn't trace it all the way through captar. I know it comes from B921 Rack 73 to B921 BDF1; Chris and I traced this fiber. From there it goes to B005 Rack 611 and then to B950-R42 (now renumbered as R02) at elevation 36, I believe. There are lots of fibers at that location, so we may need two people to locate it - hold a strobe to one end and look for it on the other end.

And rougher notes that cpo doesn't currently understand:

rack B921-BDF1
SM slot 3 to B005 FODU 3 RK 611
fibers 3 4 in fodu

In building 921 rack 73 the DMPH (HXR) server is at height 24 and DMPS (SXR) server is at height 22.

HXR

TBD, but presumably similar to SXR.

Pictures of B921 Rack 73

Front and back

Image AddedImage Added

Room 208 Fiber Connections

See FEE Alcove for description of which patch panel in 208 goes to which detector. Note that the fiber numbering on that page is different from here. On the FEE alcove page we number fibers left-to-right, then top-to-bottom. Here we use a better scheme: using the actual fiber numbers marked on the cassettes. We should convert the FEE-alcove page to use the better fiber-numbering scheme.

Source	Destination	Notes
ATCA FEE router port 0	ATCA room 208 router port 1	10Gb network to SRCF node, the connection is done via the octopus fiber #4
room 208 ATCA crate switch optical fiber port 0	SRCF LC cassette 4 (counting from 1, left to right) fibers 11/12	10Gb network to SRCF node (drp-srcf-cmp004?)
TMO XPM 2 network connection (TMO FODU 1, Cassette 4 fibers 5-6)	ATCA switch optical port 7 counting from 0	needed to swap tx/rx fibers to get link-lock
RIX XPM 3 network connection (RIX FODU, cassette 1, fibers 15-16)	ATCA switch optical port 6 counting from 0
Mono Encoder Network	From FEE Fodu 1 cassette 3 fibers 1,2 to SRCF LC fodu fibers 21,22
Timing output of XPM2 in 208	TMO FODU 1, Cassette 3, Fibers 17-18: 1.3.17-18	Cassette 1 is missing
Timing output of XPM3 in 208	RIX FODU 1, Cassette 1, Fibers 7-8: 1.1.7-8
XPM0-AMC0-PORT0	RIX 1.1.3-4	This is XPM0 → XPM3 in RIX, FODU 1 for RIX is FODU 5 in 208
XPM0-AMC0-PORT1	TMO 2.4.3-4	This is XPM0 → XPM2 in TMO, FODU 2 for TMO is FODU 7 in 208
XPM0-AMC1-PORT2	TMO 2.3.33-34 (tmo cassette 3 fiber 33-34)	Backup connection for XPM0->XPM2
XPM5-AMC0-PORT0	RIX 1.1.3-4	This is XPM3→ XPM5
XPM6-AMC0-PORT0	TMO 1.3.17-18	This is XPM2→ XPM6
XPM0-AMC1-PORT0	FEE FODU 1, Cassette 4 fiber 11-12 (top right)	LCLS2 timing for FEE Teststand
TMO ATM CAMLINK	TMO FODU 1 cassette 3 fiber 1-2 (a.k.a. TMO1.3.1-2)	cassette 1 is missing, swapped tx/rx at bos
RIX FIM MR4K2	RIX FODU 1 cassette 1 fibers 25-26 (a.k.a RIX1.1.25-26)
RIX FIM MR3K2	RIX1.1.27-28
RIX FIM CHEMRIX	RIX1.1.29-30
TMO FIM1	TMO1.3.5-6	Not sure which FIM this really corresponds to in TMO
TMO FIM2	TMO1.3.7-8	Not sure which FIM this really corresponds to in TMO
RIX HSD2	RIX1.1.19-20	I may be swapping hsd2/3 (this was FEE fodu 1.3.18, old numbering scheme)
RIX HSD3	RIX1.1.23-24	I may be swapping hsd2/3 (this was FEE fodu 1.3.15, old numbering scheme)
TMO CAMLINK OPAL1	TMO1.4.1-2	swapped tx/rx at bos
TMO CAMLINK OPAL2	TMO1.3.3-4	swapped tx/rx at bos
TMO CAMLINK FZP	TMO1.2.11-12	swapped tx/rx at bos
RIX CAMLINK ATM	RIX1.3.13-14
TMO HSD3 or companion	TMO1.4.13-14	I may be swapping hsd3 with its companion (don't know the name: not in tmo.cnf?). This one was in fee fodu1.1.11
Source	Destination	Notes
ATCA FEE router port 0	ATCA room 208 router port 1	10Gb network to SRCF node, the connection is done via the octopus fiber #4
room 208 ATCA crate switch optical fiber port 0	SRCF LC cassette 4 (counting from 1, left to right) fibers 11/12	10Gb network to SRCF node (drp-srcf-cmp004?)
TMO XPM 2 network connection (TMO FODU 1, Cassette 4 fibers 5-6)	ATCA switch optical port 7 counting from 0	needed to swap tx/rx fibers to get link-lock
RIX XPM 3 network connection (RIX FODU, cassette 1, fibers 15-16)	ATCA switch optical port 6 counting from 0	Mono Encoder Network	From FEE Fodu 1 cassette 3 fibers 1,2 to SRCF LC fodu fibers 21,22
Timing output of XPM2 in 208	TMO FODU 1, Cassette 3, Fibers 17-18: 1.3.17-18	Cassette 1 is missing
Timing output of XPM3 in 208	RIX FODU 1, Cassette 1, Fibers 7-8: 1.1.7-8
XPM0-AMC0-PORT0	RIX 1.1.3-4	This is XPM0 → XPM3 in RIX, FODU 1 for RIX is FODU 5 in 208
XPM0-AMC0-PORT1	TMO 2.4.3-4	This is XPM0 → XPM2 in TMO, FODU 2 for TMO is FODU 7 in 208
XPM0-AMC1-PORT2	TMO 2.3.33-34 (tmo cassette 3 fiber 33-34)	Backup connection for XPM0->XPM2
XPM5-AMC0-PORT0	RIX 1.1.3-4	This is XPM3→ XPM5
XPM6-AMC0-PORT0	TMO 1.3.17-18	This is XPM2→ XPM6
XPM0-AMC1-PORT0	FEE FODU 1, Cassette 4 fiber 11-12 (top right)	LCLS2 timing for FEE Teststand
TMO ATM CAMLINK	TMO FODU 1 cassette 3 fiber 1-2 (a.k.a. TMO1.3.1-2)	cassette 1 is missing, swapped tx/rx at bos
RIX FIM MR4K2	RIX FODU 1 cassette 1 fibers 25-26 (a.k.a RIX1.1.25-26)	RIX FIM MR3K2	RIX1.1.27-28	RIX FIM CHEMRIX	RIX1.1.29-30
TMO FIM1	TMO1.3.5-6	Not sure which FIM this really corresponds to in TMO
TMO FIM2	TMO1.3.7-8	Not sure which FIM this really corresponds to in TMO
RIX HSD2	RIX1.1.19-20	I may be swapping hsd2/3 (this was FEE fodu 1.3.18, old numbering scheme)
RIX HSD3	RIX1.1.23-24	I may be swapping hsd2/3 (this was FEE fodu 1.3.15, old numbering scheme)
TMO CAMLINK OPAL1	TMO1.4.1-2	swapped tx/rx at bos
TMO CAMLINK OPAL2	TMO1.3.3-4	swapped tx/rx at bos
TMO CAMLINK FZP	TMO1.2.11-12	swapped tx/rx at bos
RIX CAMLINK ATM	RIX1.3.13-14
TMO HSD3 or companion	TMO1.4.13-14	I may be swapping hsd3 with its companion (don't know the name: not in tmo.cnf?). This one was in fee fodu1.1.11 (old numbering scheme). Needed tx/rx swap at bos.
TMO HSD3 or companion	TMO1.4.15-16	I may be swapping hsd3 with its companion (don't know the name: not in tmo.cnf?). This one was in fee fodu1.1.9 (old numbering scheme). Needed tx/rx swap at bos.
TMO HSD5 or HSD7	TMO1.4.31-32	I may be swapping hsd5/hsd7. This one was in fee fodu 1.1.1 (old numbering scheme). Needed tx/rx swap at bos.
TMO HSD5 or HSD7	TMO1.4.29-30	I may be swapping hsd5/hsd7. This one was in fee fodu 1.1.5 (old numbering scheme). Needed tx/rx swap at bos.
TMO HSD4HSD3 or companion	TMO1.4.2715-2816	I may be swapping hsd3 with its companion (don't know the name: not in tmo.cnf?). This one was in fee fodu1Was in fee fodu 1.1.4 9 (old numbering scheme). Needed tx/rx swap at bos.
TMO HSD4 companionHSD5 or HSD7	TMO1.4.3331-3432	I may be swapping hsd5/hsd7. This one was Was in fee fodu 1.1.6 1 (old numbering scheme). tx Needed tx/rx swap at bos.
TMO HSD1HSD5 or HSD7	TMO1.4.1729-1830	I may be swapping hsd5/hsd7. This one was in fee fodu 1Was in fee fodu 1.1.12 5 (old numbering scheme). tx Needed tx/rx swap at bos.
TMO HSD2HSD4	TMO1.4.1927-2028	Was in fee fodu 1.1.8 4 (old numbering scheme). NO tx/rx swap at bos!.
TMO HSD6HSD4 companion	TMO1.4.3533-3634	Was in fee fodu 1.1.3 6 (old numbering scheme). tx/rx swap at bos.
TMO HSD6 companionHSD1	TMO1.4.2517-2618	Was in fee fodu 1.1.2 12 (old numbering scheme). tx/rx swap at bos.
TMO HSD9HSD2	TMO1.4.2119-2220	Was in fee fodu 1.1.7 8 (old numbering scheme). tx NO tx/rx swap at bos.!
TMO HSD8HSD6	TMO1.4.2335-2436	Was in fee fodu 1.1.10 3 (old numbering scheme). tx/rx swap at bos.
TMO HSD6 companion	TMO1.4.25-26	RIX HSD1	RIX1.1.21-22	Was in fee fodu 1.31.8 2 (old numbering scheme). tx/rx swap at bos.
TMO HSD9	TMO1.4.21-22	RIX HSD0	RIX1.1.17-18	Was in fee fodu 1.31.9 7 (old numbering scheme). tx/rx swap at bos.
TMO HSD8	TMO1.4.23-24	Was in fee fodu 1.1.10 (old numbering scheme). tx/rx swap at bos.
RIX HSD1	RIX1.1.21-22	Was in fee fodu 1.3.8 (old numbering scheme)
RIX HSD0	RIX1.1.17-18	Was in fee fodu 1.3.9	PEPPEX HSD1	Room 208 Rack 2 PH4 "To B920 R90-S SLOT B" fibers 21-22 (second from bottom). Also labelled "slot 4" on the slot itself.	Was in fee fodu 2.4.3 (old numbering scheme)
PEPPEX HSD0HSD1	Room 208 Rack 2 PH4 "To B920 R90-S SLOT B" fibers 1921-20 22 (third second from bottom). Also labelled "slot 4" on the slot itself.	Was in fee fodu 2.4.4 3 (old numbering scheme)
PEPPEX HSD0	Room 208 Rack 2 PH4 "To B920 R90-S SLOT B" fibers 19-20 (third from bottom). Also labelled "slot 4" on the slot itself.	Was in fee fodu 2.4.4 (old numbering scheme)
PEPPEX OPAL	Room 208 Rack 2 PH4 "To B920 R90-S SLOT B" fibers 23-24 (bottom pair). Also labelled "slot 4" on the slot itself.	Was in fee fodu 2.4.5 (old numbering scheme)
XTCAV (SXR, cpo believes)	Room 208 Rack 2 PH2 fibers 61-62 from B005 (each cassette has 12 fibers, so top of sixth cassette from left)	Was in fee fodu 1.2.2 (old numbering scheme)
TXI FIM	Room 208 ~~XPM 5 AMC 1 SFP 2~~ (20240112) XPM 6 AMC 1 SFP 6 To FODU 8 Cassete 2 Port 9-10 Data To FODU 8 Cassete 2 Port 11-12
TMO LCLS1 timing	XPM7 AMC1 port1 to TMO FODU 7 Cassette 3 (counting from 1 with 4 cassettes total, one currently unoccupied) fibers 11-12
XPM0-AMC1-PORT4	FEE FODU 6, Cassette 3 fiber 23-24 (lower right)	LCLS2 timing for FEE Teststand XPM10 RTM
TMO HSD 88 or 89	BOS (2.1)1-2 or 5-6	In TMO Hutch connected to FODU1 Cassette 1 position 7 and position 8 (most left in the middle row might be broken) and 15 (lowest row int he middle) RACK 4 in 208 FODU 7 RACK 4
TMO HSD 89 or 88	BOS(2.1) 5-6 or 1-2	in TMO Hutch connected to FODU1 Cassette 1 position 9 and 10 RACK 4 in 208 FODU 7 RACK 4 N.B. position 9 (in the middle row third from the left) was already taken in 208 but not in TMO. Connected to FODU4 (208) cassette 2 (second from the left) position 7 (first from the left in the middle), but removed because no fiber in TMO.
TMO HSD 2	BOS 1.8.3	In TMO hutch connected to FODU1 Cassette 1 position 3 (counting from top left from 1) RACK4
TMO HSD 1 (1B:B)	BOS 1.8.3	In TMO hutch connected to FODU1 Cassette 1 position 3 (counting from top left from 1) RACK4
TMO HSD 18 (B1:B)	BOS 1.8.4	In TMO hutch connected to FODU1 Cassette 1 position 4 (counting from top left from 1) RACK4
RIX High-rate encoder in FEE (data and timing, in that order)	From FEE: B940-008-R03-FODU-U1 PAIRS 2 and 3 COUNTING FROM 1 Through FEE alcove: B940-009-R06-FOD3-U1 pairs 2 and 5 counting from 1 To B950-208-r42-FOD3-U2 PAIRS 2 and 5 COUNTING FROM 1	Swapped tx/rx at xpm5 amc1 port 2 (counting from 0). Data also needed to be swapped going into BOS (1.7.8).	TMO HSD 9	BOS 1.8.4	In TMO hutch connected to FODU1 Cassette 1 position 4 (counting from top left from 1) RACK4

XPM Topology

Code Block
lcls2Timing -> xpm0 -> 2 (tmo) -> 4 (tmo) -> 6 (208) -> BOS -> 3 (rix) -> 5 (208) -> BOS -> 10(fee) -> 11(fee) lcls1Timing -> xpm7

...

Beginning November 4, 2024, login to Confluence and Jira will change. Read more.

Page tree

Versions Compared

Old Version 160

New Version 189

Key

Cabling

Top Patch Panel:

Cabling

Top Patch Panel:

Bottom Patch Panel (MPO):

Bottom Patch Panel (LC):

Bottom Patch Panel (MPO):

TMO Hutch Fiber Connections

Bottom Patch Panel (LC):

LC

TMO

Hutch Fiber Connections

RIX Hutch Fiber Connections

MFX Hutch Fiber Connections

XTCAV Fiber Route

SXR

HXR

Pictures of B921 Rack 73

Room 208 Fiber Connections