Search/Navigation:
Related:
SLAC/EPP
/HPS Public
Jefferson Lab/Hall B
/HPS Run Wiki
S30XL-LESA/LDMX
Log into 'clonioc1clonioc4' (requires access through gateway).
Code Block | ||
---|---|---|
| ||
ssh hallgw
ssh clonioc1 |
Start GUIs
hpsrun@clonioc1
hps_epics dev # pull up the screens that are relevant
|
Log into 'clonioc1' (requires access through gateway).
Code Block | ||
---|---|---|
| ||
ssh clonioc1 cd /usr/clas12/hps/dev/ source .setup-hps cd utils ./start_svt_guis.sh |
...
# Use procServMgr to control the IOC
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iochvCaen [status|start|stop]
# Monitor output (to check if commands get through the IOC for example)
telnet localhost port # you can find the 'port' from the status command above
# while in monitor mode:
# If you type 'Cntrl-X' the IOC will stop and restart automatically
# You can type 'Cntr-]' to get telnet prompt (and e.g. 'quit' to exit form there). |
...
Log into 'clonioc1clonioc4' (requires access through gateway).
Code Block | ||
---|---|---|
| ||
ssh hallgw
ssh clonioc1 |
Start IOCs:
Code Block | ||
---|---|---|
| ||
epics@clonioc4 #default passw cd /usr/clas12/hps/dev/ source .setup-hps # Use procServMgr to control the IOC cd utilsprocServMgr -p /usr/clas12/hps/dev/apps/iocBoot [-i IOC_NAME] [status|start|stop] # Examples: # start/stop/status for all SVT DAQ IOCs: procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status/start/stop # Control DPMIOC only: procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status/start/stop -i iocsvtDaq status/start/stop # Data DPM "X" (X=0-13) IOC only: procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status/start/stop -i iocsvtDaqDpmX status/start/stop # Bring up the IOC stdout for all or individual SVT DAQ IOCs cd /usr/clas12/hps/dev/apps/svtDaqApp/scripts ./start_svt_dpm.py |
...
mon.py -h [dpmX|dtmY|cntrldpm] # 'X'=0-13 and 'Y'=0-1 |
If everything fails try to use the below standard procServMgr scripts:
Code Block | ||
---|---|---|
| ||
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status/start/stop |
If the IOC refuses to stop or start, the process might be stuck and you manually have to kill the IOCs before you restart.
If that fails, call Pelle.
NOT USED FOR THE MOMENT
Access IOC from clonioc1:
Code Block | ||
---|---|---|
| ||
telnet localhost 20006 # iochvCaen telnet localhost 20007 # iocsvtDaq |
...