Search/Navigation:
Related:
SLAC/EPP/HPS Public
Jefferson Lab/Hall B/HPS Run Wiki
S30XL-LESA/LDMX
Code Block |
---|
------- HPS SVT Start of Shift Checklist -------- Shifter name: Time and date: Previous Shifter: Hall B beamline shifter: Current run: SVT module power status (ON/OFF): Write down lowest and highest values of AVDD, DVDD and V125 currents e.g. Lowest: AVDD - 100 mA, Top, Hybrid 3, incl. module nr: |
Code Block |
---|
V125 - ... Highest: AVDD - 400 mA, Bottom, Hybrid 5, V125 - ... Lowest: Highest: Check high voltage setting for each module (should be 180 V) (OK?): Check SVT module temperature, write down highest and lowest temperature ( e.g. Lowest: FPGA 3, Hybrid 0, 19.2 C, Highest FPGA 5, Hybrid 1, 24.3 C Note: FPGA 5, hybridHybrid 1 is not in use and should be 0):. Module Lowest [mA] Highest [mA] Check temperature at the vacuum chamber input and output: [Temperature (C)] Input: Output: ECal status (short summarye.g. Do all HV look ok? etc.): Trigger statusType (short summarye.g. Single Cluster Trigger Top): PairTrigger Rate: Pair spectrometer magnet (current and : [Current] [B-field)] Value: Accelerator status: Beam current (nA): Beam position X,Y (um): Beam plans for the shift (Closest measurement to Pair spectrometer): SVT plans for the shift (Closest measurement to Pair spectrometer): Notes from previous shifter: |
Code Block |
---|
------- HPS SVT Hourly Shift Checklist -------- Shifter name: Current run/status: Time: SVT module power status (ON/OFF): Low Voltage Lowest [mA] Highest [mA] AVDD DVDD V125 Check high voltage setting for each moduleWrite down lowest and highest values of AVDD, DVDD and V125 currents e.g. Lowest: AVDD - 100 mA, Top, Hybrid 3, V125 - ... Highest: AVDD - 400 mA, Bottom, Hybrid 5, V125 - ... Lowest: Highest: Check SVT module temperature, write down highest and lowest temperature ( e.g. Lowest: FPGA 3, Hybrid 0, 19.2 C, Highest FPGA 5, Hybrid 1, 24.3 C Note: FPGA 5, hybridHybrid 1 is not in use and should be 0). Check high voltage setting for each module: Module Lowest [mA] Highest [mA] Check temperature at the vacuum chamber input and output: [Temperature (C)] Input: Output: ECal status (write a small summarye.g. Do all HV look ok? etc.): Trigger statusType (write a small summarye.g. Single Cluster Trigger Top): Trigger Rate: Pair spectrometer magnet (current and : [Current] [B-field)] Value: Accelerator status: Beam current (nA) (Closest measurement to Pair spectrometer): Beam position X,Y (um) (Closest measurement to Pair spectrometer): Beam plans: Notes/comments: |
Code Block |
---|
------ HPS SVT Shift Summary Checklist ------- Shifter name: Time and date: Runs taken: ?[Run nr] [Start] [Stop] [Events] [Beam current] [Beam position X] [Beam position Y] [Comments] Next Shifter: Notes/comments: |
...