...
git clone --recurse-submodules https://:@gitlab.cern.ch:8443/rce/pixelrce.git
cd pixelrce/rce
source /opt/rh/devtoolset-4/enable
source scripts/setup-dev.sh
Setting up an RCE with static IP
make sure the ntp daemon is installed and enabled:
yum install ntp
Edit /etc/ntp.conf and replace server definitions by
server 172.27.100.16
systemctl start ntpd
systemctl start enable ntpd
Edit /etc/rc.local
ntpdate -s 172.27.100.16
touch /var/lock/subsys/local
Fix permissions
chmod +x /etc/rc.d/rc.local
Edit /etc/sysconfig/network-scripts/ifcfg-eth0
NAME=eth0
TYPE=ethernet
BOOTPROTO=none
DEVICE=eth0
NETMASK=255.255.252.0
IPADDR=172.27.104.52
DNS1=134.79.111.111
GATEWAY=172.27.104.1
ONBOOT=yes
NM_CONTROLLED=no
IPV4_FAILURE_FATAL=no
IPV6INIT=no(cd build.rce ; make -j4 ) && ( cd build.host; make -j4 )