Page History

Connection Details

Connection details should include:

Target chamber flange/feedthru
Controller ID and specific interface, e.g. card, port,...
Digi/moxa name and port (if used)
IOC
- From IOC we will determine server and then rack location
Connection to server, e.g. ethernet, usb3, etc.

Note from Dimitri (27 March 2024):

For records (and maybe consistency):

Our detector Q3 is connected in place of quad1 on the PDU and pgp card, alias in the daq is also Epix10kaQuad1.
epix100_0 for XPCS is connected in place of epix3 on the PDU and pgp card, alias in the daq is still epix100a_0_xpcs because we did not want to mess up with the scripts.

Motor Checklist

Purpose	Base PV	Connection	pmgr	python device	Cabled?	Homed?

West

East_X

MEC:PPL:MMN:17

XPS 3

T5/*1,

T5

XPS 3/

*

1,

ioc-mec-ppl-xps3

Newport

east_x

Yes

West

East_Y

MEC:PPL:MMN:18

XPS 3

T5/*2,

T5

XPS 3/

*2

2,

ioc-mec-ppl-xps3

Newport

east_y

Yes

West

East_Z

MEC:PPL:MMN:19

T5/*3, XPS 3/3,

T5/*3Newport

ioc-mec-ppl-xps3

Newport

east_z

Yes

East

West_X

MEC:PPL:MMN:20

T5/*4, XPS 3/4,

T5/*4Newport

ioc-mec-ppl-xps3

Newport

west_x

Yes

East

West_Y

MEC:PPL:MMN:21

T5/*5, XPS 3/5,

T5/*5

ioc-mec-ppl-xps3

Newport

west_y

Yes

East

West_Z

MEC:PPL:MMN:22

T5/*6, XPS 3/

5, T5/*6Newport

6, ioc-mec-ppl-xps3	Newport	west_z	Yes	Yes
VISAR_X	MEC:PPL:MMN:

16XPS 2/8,

32

VacCable 9, T6/DB25-1, AirCable "XPS DelayStage", XPS 4/8, ioc-mec-ppl-xps4

Newport

visar_x

Yes

Newport


VISAR_Y	MEC:PPL:MMN:

23

31	VacCable 2, T6/DB25-2, AirCable "XPS2 #4", XPS 4

XPS 3

/7, ioc-mec-ppl-xps4	Newport	visar_y	Yes	Yes
VISAR_Z	MEC:PPL:MMN:

09XPS 2/1,

28

VacCable 10, T6/5, AirCable "XPS2 #3/XPS2 #1", XPS 4/3, oc-mec-ppl-xps4

Newport

visar_z

Yes

Newport


Zyla_500mm	MEC:PPL:MMN:08

XPS NN

in-air to beam dump, XPS 1/8, ioc-mec-ppl-xps1	Newport	zyla_z	Yes	Yes
TC_hexapod	IOC:MEC:HEX1

B9 (I think)

B4/L8

Hexapod

pending

Jira

server	SLAC National Accelerator Laboratory
serverId	1b8dc293-975d-3f2d-b988-18fd9aec1546
key	ECS-4500

Yes

Moved, and re-initialized.

Target_X

MEC:USR:MMS:17

sD2

D2/D5

PM add MForce chassis, digi/moxa, ioc/server

MF? moxa-mec-09:4001 (R62 E15), ioc-mec-usrppl-ims

PLS-85

(version?)

Sample S	target_x	Yes	Yes. Homed to HLS and LLS, moved to 0.
FXRTS_X

PI XYZ block?

MEC:TC1:MMS:09	D2/D5 MF? digi-mec-07:2111 (R64A E19), ioc-mec-tc1-xuv-ims	XUV X	fxrts_x	Yes	Yes. Homed to HLS and LLS, moved to 0.
FXRTS_Y	MEC:TC1:MMS:08	D2/D5 MF? digi-mec-07:2110 (R64A E19), ioc-mec-tc1-xuv-ims	XUV Y	fxrts_y	Yes	Yes. Homed to HLS and LLS, moved to 10.
FXRTS_Z	MEC:TC1:MMS:07	D2/D5 MF? digi-mec-07:2109 (R64A E19), ioc-mec-tc1-xuv-ims	XUV Z	fxrts_z	Yes	Yes. Homed to HLS and LLS, moved to 10.
BXRTS_X	MEC:PPL:MMN:07	VacCable 7, B7/H3, AirCable "XPS2 #3", Patch Panel #7, XPS 1/7, ioc-mec-ppl-xps1	Newport	bxrts_x	Yes	Yes
BXRTS_Y	MEC:PPL:MMN:11	VacCable (no label), B7/H2, AirCable (no label), Patch Panel #11, XPS 2/3, ioc-mec-ppl-xps2	Newport	bxrts_y	Yes UTS Stage DB15	Yes.
BXRTS_Z	MEC:PPL:MMN:16	VacCable (no label), B7/H5, Air Cable "XPS2 #2", Patch Panel #16, XPS 2/8, ioc-mec-ppl-xps2	Newport	bxrts_z	Yes	yes
Diode_Z	MEC:PPL:MMN:29	VacCable 5, T6/7, AirCable "XPS3 #7", XPS 4/5, ioc-mec-ppl-xps4	Newport	diode_z	Yes	Yes
Diode_Y	MEC:PPL:MMN:30	VacCable 11, Flange B5, port B2, AirCable "XPS1 #4", XPS 4/6, ioc-mec-ppl-xps4	Newport	diode_y	Yes	Yes

FXRTS_YPI XYZ block?FXRTS_ZPI XYZ block?BXRTS_XNewportBXRTS_YNewportBXRTS_ZNewportDiode_XNewportDiode_YNewport

Beam_block

MEC:TC1:MMS:22

T5/5

MF? moxa-mec-09:4005 (R62 E15), ioc-mec-tc1-vt50-ims

VT-50-100

(version?)

block_z

Yes

Yes, soft limits 0-85

JJ Slits

MEC:TC1:MMS:[17,18]

MEC:TC1:MMS:[01,02]

T5/2 and T5/8

Yes

No (limit switches no working)

Filter wheel

MEC:USR:MMS:20

Flange/FF?

Cable #4

Yes

Referenced.

Detectors Checklist

Detector

DAQ alias

Connection

Cabled?

In DAQ?

epix10k-540k

quad_0

Fiber:

B2/#1,#2
PR60 E15 Middle #1
R62 E33 Right #2
MTP to daq-mec-pgp02
- rear
- upper right side
- left most fiber port

Power: B3/Quad 0

Yes

Yes. As Q0 for MPOD and fiber connections.

epix10k-540k

quad_3

Fiber:

B2/#7,#8
PR60 E15 Middle #4
R62 E33 Right #2
MTP to daq-mec-pgp02
- rear
- upper right side
- left most fiber port

Power: B3/Quad 3

Yes

Yes. As Q1 for MPOD and fiber connections.

ePix100

epix100a_1_bxrts

Planned:Fiber pair from Flange D2d, power from the South epix-PDU feedthru on B3.

MTP to daq-mec-cam01

Yes

Yesb_xrts

ePix100

epix100a_2_fxrts

Planned: Fiber pair from Flange B2 Quad 2 (#5/#6), power from North epix-PDU feedthru on B3.

MTP to daq-mec-cam01

Yes

ePix100

epix100a_0_

f_xrts

ePix100

xpcs

in-air

Dimitri created a dummy flange (add details)
MTP to daq-mec-cam01

Yes

Andor Zyla

zyla

in-air

USB/Fiber extender to daq-mec-cam02

Yes

VISAR 1

visar_1

Network connection with Windows PC ioc-mec-visar1

Yes

Not tested right now since under regular use

VISAR_2

visar_2

Network connection with WIndows PC ioc-mec-visar2

Yes

Not tested right now since under regular use

Timing diode

PVs are:

MEC:QADC:01:CH{0,1,2,3}

B3

ioc-mec-qadc.

Timing fiber connected.

Diode signal into A1 with SMA/Male - SSMC/Female Coaxial Jumper Cable and VLM-83-2W-S+ limiter.

Yes

qadc134 IOC is running. Here is how to display:

PCIe Quad ADC Digitizer Boards (QADC and QADC134) - needs to be updated, see

Jira

server	SLAC National Accelerator Laboratory
serverId	1b8dc293-975d-3f2d-b988-18fd9aec1546
key	ECS-4919

.

27 March 2024: Diode is placed close to target during VISAR shots. Under test.

XRT spectrometer

hxsss

N/A

Testing planned for 28 March 2024.

XTCAV

ztcav

N/A

Testing planned for 28 March 2024.

Confluence and Jira now require federated login. Read more.

Page tree

Versions Compared

Old Version 12

New Version Current

Key

Connection Details

Motor Checklist

Detectors Checklist