- REF
- OVER FIBER
- Step 0: MAKE SURE POWER IS ON
- Step 1 to 2:
Expand title Step 2: Check if firmware have been loaded correctly - $ python epix10kaDAQ.py
- GitHashShort is more important
Expand title Step 3: How to search for get HASH - How do you know it is the correct version to be using?
OVER JTAG (joint test action group) (USING QUADS AS NORMALLY DONE THIS WAY)
- Ref
Does not mater if fiber or sensor is plugged in, working under assumption it is bare board
Power on the boardInstalling firmware via JTAG (Slower... more involved...)