...
Variable name | description |
---|---|
lat_evt_timestamp | timestamp of the event, caculated using GEM counters (sec) |
lat_evt_delta_time | time difference between two consecutive events, calculated unsig GEM counters (sec) |
lat_ancillary_delta_time | time difference between two consecutive events, calculated using AD counters (sec) |
lat_timestamps_difference | lat_evt_delta_time - lat_ancillary_delta_time (sec) |
|
|
gem_trigger_condition | GEM condition summary word remapped to the following values: ext=0, tkr=1, cal_le=2, cal_he=3, ext+tkr=4, ext+cal_le=5, ext+tkr+cal_le=6. |
gem_tkr_trigger_timing | Arrival time of tkr trigger condition within the trigger window (clk ticks) |
gem_cal_le_trigger_timing | Arrival time of cal_le trigger condition within the trigger window (clk ticks) |
gem_cal_he_trigger_timing | Arrival time of cal_he trigger condition within the trigger window (clk ticks) |
gem_ext_trigger_timing | Arrival time of ext trigger condition within the trigger window (clk ticks) |
lat_evt_energy | Total raw energy in the calorimeters (MeV) |
lat_evt_theta_xz | reconstructed event angle in the XZ plane (deg) |
lat_evt_theta_yz | reconstructed event angle in the YZ plane (deg) |
lat_evt_impact_point_tkr_x | reconstructed event impact point on top tracker layer, x coordinate (mm) |
lat_evt_impact_point_tkr_y | reconstructed event impact point on top tracker layer, y coordinate (mm) |
lat_evt_impact_point_cal_x | reconstructed event impact point on top of the cal, x coordinate (mm) |
lat_evt_impact_point_cal_y | reconstructed event impact point on top of the cal, y coordinate (mm) |
lat_evt_top_tkr_x_hi | hit position on top tracker layer x |
lat_evt_top_tkr_y_hit | hit position on top tracker layer x |
lat_evt_tkr_top_num_hits | number of hits summed over the top tracker layers |
|
|
temX-tkr_strip_count | Number of strips per event in the tracker of tower X |
temX-cal_log_count | Number of logs per event in the calorimeter of tower X |
temX-cal_energy | Total raw energy in the calorimeter of tower X (MeV) |
acd-tileXX_pulse_height | Pulse height in the ACD tile XX (adc counts) |
acd-tileXX_veto_pulse_heigh | Pulse height in the ACD tile XX , when the veto signal is ON (adc counts) |
|
|
tagger_tag_momentum | Particle momentum as measured by the tagger (GeV) |
lat_tag_gamma_energy | Photon evergy, defined as BEAM_ENERGY - tagger_tag_momentum (MeV) |
tagger_total_beam_energ | Total beam energy: tagger_tag_momentum + lat_evt_energy (MeV) |
tagger_tag_cu_momentum | Particle momentum measured using the tagger module 0-1 and the CU |
|
|
tagger_beam_angle_x | Beam angle, measured using tagger module 0-1, in the XZ plane (rad) |
tagger_beam_angle_y | Beam angle, measured using tagger module 0-1, in the YZ plane (rad) |
|
|
tagger_cu_projected_beam_x | Beam impact point on CU top tracker layer, measured using tagger module 0-1, x coordinate (mm) |
tagger_cu_projected_beam_y | Beam impact point on CU top tracker layer, measured using tagger module 0-1, y coordinate (mm) |
tagger_cu_projected_beam_residual_x | Difference between lat_evt_impact_point_tkr_x (traslated in the absolute reference frame) and tagger_cu_projected_beam_x (mm) |
tagger_cu_projected_beam_residual_y | Difference between lat_evt_impact_point_tkr_y (traslated in the absolute reference frame) and tagger_cu_projected_beam_y (mm) |
|
|
tagger-modX_Number_of_Clusters_X | Number of cluster on the x Layer of Tagger Module X |
tagger-modX_Number_of_Clusters_Y | Number of cluster on the y Layer of Tagger Module X |
tagger-modX_Impact_Point_X | Beam impact point on the x Layer of Tagger Module X (defined as the position of the cluster with max pulse height) |
tagger-modX_Impact_Point_Y | Beam impact point on the y Layer of Tagger Module X (defined as the position of the cluster with max pulse height) |
tagger-modX_n_hits | Number of readout strips of Tagger Module X |
|
|
tagger_X_int |
|
tagger_residual_x2 |
|
tagger_residual_x3 |
|
...
Variable name | description |
---|---|
View | Layer view coded with a number: 'X'= 0, 'Y'= 1 |
Layer_Number | Layer number |
Strip | Strip numebr number |
Tagger Ntuple:
In this ntuple there is one row per spill, and is used to plot trigger rate as function of time
Variable name | description |
---|---|
live_time | Tmestamp of the last event in the spill |
s0_counts | Number of S0 count per spill |
trg_request_counts | Number of trigger request per count per spill |
trg_accept_counts | Number of trigger accepted count per spil |
trg_acp2req_ratio | Ration betrwen trg_accept_counts and trg_request_counts |
Tagger Layer Ntuple:
In this Ntuple there is one row for one strip in the data stream, and it's used to plot the strip occupancy of the tagger layers
...