Search/Navigation:
Related:
SLAC/EPP
/HPS Public
Jefferson Lab/Hall B
/HPS Run Wiki
S30XL-LESA/LDMX
Log into 'clonioc4' (requires access through gateway).
Code Block | ||
---|---|---|
| ||
ssh hpsrun@clonioc1
hps_epics dev # pull up the screens that are relevant
|
Log into 'clonioc1' (requires access through gateway).
Code Block | ||
---|---|---|
| ||
ssh clonioc1
cd /usr/clas12/hps/dev/
source .setup-hps
# Use procServMgr to control the IOC
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iochvCaen [status|start|stop]
# Monitor output (to check if commands get through the IOC for example)
telnet localhost port # you can find the 'port' from the status command above
# while in monitor mode:
# If you type 'Cntrl-X' the IOC will stop and restart automatically
# You can type 'Cntr-]' to get telnet prompt (and e.g. 'quit' to exit form there). |
Log into 'clonioc4' (requires access through gateway).
Code Block | ||
---|---|---|
| ||
ssh epics@clonioc4 #default passw
cd /usr/clas12/hps/dev/
source .setup-hps
# Use procServMgr to control the IOC
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot [-i IOC_NAME] [status|start|stop]
# Examples:
# start/stop/status for all SVT DAQ IOCs:
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status/start/stop
# Control DPMIOC only:
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status/start/stop -i iocsvtDaq status/start/stop
# Data DPM "X" (X=0-13) IOC only:
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status/start/stop -i iocsvtDaqDpmX status/start/stop
# Bring up the IOC stdout for all or individual SVT DAQ IOCs
cd /usr/clas12/hps/dev/apps/svtDaqApp/scripts
./start_svt_mon.py -h [dpmX|dtmY|cntrldpm] # 'X'=0-13 and 'Y'=0-1 |
If everything fails try to use the below standard procServMgr scripts:
Code Block | ||
---|---|---|
| ||
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status/start/stop |
If the IOC refuses to stop or start, the process might be stuck and you manually have to kill the IOCs before you restart.
If that fails, call Pelle.
NOT USED FOR THE MOMENT
Access IOC from clonioc1:
Code Block | ||
---|---|---|
| ||
telnet localhost 20006 # iochvCaen
telnet localhost 20007 # iocsvtDaq |
Control IOC from clonioc1:
Code Block | ||
---|---|---|
| ||
Ctrl+] to exit #(type quit in terminal)
Ctrl+x to reboot |
ProcServer commands
The path has to be included to override the production default. So it's a bit cumbersome, but you can put the lines in a local script.
Code Block | ||
---|---|---|
| ||
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iocsvtDaq stop
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iocsvtDaq start
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iocsvtDaq status
# show all iocs
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status |
Development tree on clonioc1:
Code Block | ||
---|---|---|
| ||
cd /usr/clas12/hps/dev
# contains:
# apps/hvCaenApp, apps/iocBoot/iochvCaen
# apps/svtDaqApp, apps/iocBoot/iocsvtDaq
# drivers/LVMPOD |