...
hpiLO Command Line Interface
NOTE: this is for the suncatlsX/suncatfsX nodes ONLY. The suncat0XXX have a BMC/IPMI interface instead (see below)
...
Use Esc-( to get to the hpiLO prompt. Type "exit" to return to the standard
serial console.
BMC/IPMI Command Line Interface
NOTE: this is for the suncat0XXX nodes ONLY. The suncatlsX/suncatfsX have an hpiLO interface instead (see above)
...
You can also connect to the HP Baseboard Management Controller (ie, IPMI)
on the serial port by pressing
...