...
To disconnect, use
Ctrl-e c .
hpiLO Command Line Interface
- NOTE: this is for the suncatlsX/suncatfsX nodes ONLY. The suncat0XXX have
a BMC/IPMI interface instead (see below) *
Use Esc-( to get to the hpiLO prompt. Type "exit" to return to the standard
serial console.
BMC/IPMI Command Line Interface
- NOTE: this is for the suncat0XXX nodes ONLY. The suncatlsX/suncatfsX have
an hpiLO interface instead (see above) *
You can also connect to the HP Baseboard Management Controller (ie, IPMI)
on the serial port by pressing
...