Page History

...

The new version (AlarmsCfg-05-23-0105, as opposed to AlarmsCfg-05-2223-05) is mainly for putting in the new alarm limits on the merit normalized rates after the new normalization factors have been put into production. There are 01) features a few minor more minor changes, mainly in order to protect alarms limit changes and protections against low statistics , which are detailed below(see details below).

Test Procedure

We have processed monitoring products from real on-orbit data (LPA) locally with this version of AlarmsCfg.

...

The package can be rolled back to the previous version by flipping a soft link. Also note that the package is completely independent from any other package running in the pipeline and will not cause a version change of L1Proc.

CCB Jira

SSC-244@JIRA245@JIRA

Details (release notes for dataMonitoring/AlarmCfg for AlarmsCfg-05-23-

...

05)

• AlarmsCfg-05-23-01 0405 15-Feb-2010 lbaldini Minor change. A few alarms protected against low statistics.
  • Some alarms protected against low statistics:
    • CondArrCalLo_CalHiOpensWindow_TH1 (reference_histogram): min_entries = 5000 (both digi and fastmon eor).
    • CondArrCalLowTrigger_TH1 (reference_histogram): min_entries = 10000 (both digi and fastmon eor).
    • AcdSingleVetoMap_TH1 (x_average and x_rms): min_entries = 10000 (digi eor).
    • CrateNumber_TH1 (x_average): min_entries = 10000 (digi eor).
    • CondArrROITrigger_TH1 (x_average and x_rms): min_entries = 10000 (both digi and fastmon eor).
    • CondArrTKRTrigger_TH1 (x_average and x_rms): min_entries = 10000 (both digi and fastmon eor).
    • CondArrCalHi_CalLoOpensWindow_TH1 (x_average and x_rms): min_entries = 1000 (both digi and fastmon eor).
    • CondArrTKR_CalHiOpensWindow_TH1 (x_average and x_rms): min_entries = 5000 (both digi and fastmon eor).
    • CondArrROI_CalLoOpensWindow_TH1 (x_average and x_rms): min_entries = 1000 (both digi and fastmon eor
  • Alarm on the digi eor GPSInLock_TH1 protected against low statistics (condition on min entrioes changed from 500 to 1250
    • ).

• AlarmsCfg-05-23-00 04 15-Feb-2010 lbaldini Alarms on the normalized rates retuned. Minor limit change.
  • A couple of minor limit changes for
  • Retuned the alarms on the normalized rates after the new normalization factors have been put in production.Relevant Jira(s): GDQMQ-317.arrival times for both the digi and the FastMon eor.
    • CondArrTKR_CalHiOpensWindow_TH1 (low_high_ratio, pivot = 31): warning max: 5000 -> 5500, error max : 8000 -> 10000
    • CondArrTKRTrigger_TH1 (low_high_ratio, pivot = 31): warning max: 30000 -> 35000

• AlarmsCfg-05-2223-06 0403 09-Feb-2010 lbaldini Minor changeslimit change.
  • Lower warning limit for the digi trend OutF_Normalized_AcdHit_AcdTile quantity (tiles 15, 31, 47, 63) changed from 0.12 to 0.11.

• AlarmsCfg-05-23-02 09-Feb-2010 lbaldini Minor limit change.
  • Lower warning limit for the merit trend OutF_NormRateEvtsBeforeFilters quantity changed from 0.85 to 0.80 (it was a bit too tight)
  • Condition on the minimum number of entries changed for CondArrCNO_CalLoOpensWindow_TH1 (reference_histogram algorithm, both digi and fastmon end-of-run) changed from 1000 to 2500.
  • Upper warning limit for the alarm on the digi trending quantity Rate_NTkrHits_TowerPlane changed from 2.5 to 2.75. See the thread https://www-glast.stanford.edu/protected/mail/datamon/3560.html^{Image Removed} for more details.