Page History
...
| Code Block | ||
|---|---|---|
| ||
python epixm320_config_store.py --prod --user tstopr --inst tst --alias BEAM --name epixm --segm 0 --id epixm320_serial1234 --dir /cds/home/c/cpo/git/epix-hr-m-320k/ |
Be sure to adjust the user and inst options as appropriate. The dir option should provide a path the root of the epix-hr-m-320k project under which the PLL .csv files reside. The expert section holds parameters that are laid out similar to the hardware writeable reigisterswritable registers. Their names are the same as those found in devGui. These parameters contain default settings that are written to the hardware at appropriate times. Many of them were initialized from yaml files supplied in the epix-hr-m-320k project:
. Note that the list of yaml files may change with each release of the project and also that some go with a particular serial number of the detector. When a detector's serial number doesn't appear in the list of yaml files, use the corresponding generic, non-serial-numbered, file. Loading a file for a different serial-numbered detector may not work well for the intended detector.
| Code Block | ||
|---|---|---|
| ||
python epixhr_config_from_yaml.py --prod --user tstopr -- | ||
| Code Block | ||
| ||
python epixhr_config_from_yaml.py --prod --user tstopr --inst tst --alias BEAM --name epixm --segm 0 --id epixm320_serial1234 --yaml Root:/cds/home/c/cpo/git/epix-hr-m-320k/software/config/ePixHRM320k_75000018efb4ab01_ASIC_u1.yml
python epixhr_config_from_yaml.py --prod --user tstopr --inst tst --alias BEAM --name epixm --segm 0 --id epixm320_serial1234 --yaml Root:/cds/home/c/cpo/git/epix-hr-m-320k/software/config/ePixHRM320k_75000018efb4ab01_ASIC_u2.yml
python epixhr_config_from_yaml.py --prod --user tstopr --inst tst --alias BEAM --name epixm --segm 0 --id epixm320_serial1234 --yaml Root:/cds/home/c/cpo/git/epix-hr-m-320k/software/config/ePixHRM320k_75000018efb4ab01_ASIC_u3.yml
python epixhr_config_from_yaml.py --prod --user tstopr --inst tst --alias BEAM --name epixm --segm 0 --id epixm320_serial1234 --yaml Root:/cds/home/c/cpo/git/epix-hr-m-320k/software/config/ePixHRM320k_75000018efb4ab01_ASIC_u4.yml
python epixhr_config_from_yaml.py --prod --user tstopr --inst tst --alias BEAM --name epixm --segm 0 --id epixm320_serial1234 --yaml Root:/cds/home/c/cpo/git/epix-hr-m-320k/software/config/ePixHRM320k_75000018efb4ab01_PacketRegisters.yml
python epixhr_config_from_yaml.py --prod --user tstopr --inst tst --alias BEAM --name epixm --segm 0 --id epixm320_serial1234 --yaml Root:/cds/home/c/cpo/git/epix-hr-m-320k/software/config/ePixHRM320k_PowerSupply_Enable.yml
python epixhr_config_from_yaml.py --prod --user tstopr --inst tst --alias BEAM --name epixm --segm 0 --id epixm320_serial1234 --yaml Root:/cds/home/c/cpo/git/epix-hr-m-320k/software/config/ePixHRM320k_RegisterControl.yml
python epixhr_config_from_yaml.py --prod --user tstopr --inst tst --alias BEAM --name epixm --segm 0 --id epixm320_serial1234 --yaml Root:/cds/home/c/cpo/git/epix-hr-m-320k/software/config/ePixHRM320k_75000018efb4ab01_SspMonGrp_carrier.yml |
Note that the PowerSupply_Enable file has recently been trivial and causes Some files, like PowerSupply_Enable, may print 'ERROR:root:modify_device: No config values changed.', followed by 'Exception: modify_device: operation failed!', but this could change in the future. The exception is harmless. Some of these yaml files are specific to the hardware instance of the detector. Thus, a given ePixM DB instance will likely not work well with a different detector instance. Also note . These can be ignored. Be aware that loading the yaml files into the DB overwrites default settings that may have been previously modified using the ConfigDb editor in Control_GUI.
...
Overview
Content Tools