...
| Issue | Person | Priority | Status | Notes |
|---|---|---|---|---|
Load/clear config buttons don't work | Low | |||
Warning: Unable to save App Designer app object. Save not supported for matlab.apps.AppBase objects. | Sharon | Low | DONE | Seems to be harmless I just suppressed the warnings |
| DAQ crashes and takes down the whole SIOC when total number of shots exceeds 2200 (no streaming, try with streaming on) | Reproduced this with PM03 Has to be more than 5 cameras | |||
| Background not being saved | Sharon | High | DONE | |
| Implement HDF5 file saving for images | Sharon | High | DONE | |
| N/A | ||||
| Calculate how much space on disk is required | High | |||
| Install 10G switch and NAS in S10 | Arjun | High | Planning | |
| Check what happens if new DAQ is started before old one is finished (failed abort) | High | |||
| Fix binning and ROI for CMOS cameras | Medium | |||
| Can't get magnet values on first DAQ? | Medium | |||
| Check that the beam rate is not equal zero if rate set to "BEAM" | Spencer | Medium | ||
| Fix "Use_PV" functionality. | Sharon | Medium | DONE | |
| Fix camera triggers if DAQ fails. | Sharon | High | DONE | |
| "Fix cameras" button disabled if DAQ hasnt run yet | Sharon | Medium | DONE | |
| "Fix cameras" button should use default values? - yes | Sharon | Medium | DONE | |
| Timestamping fails on certain ROI settings? | Spencer | High | DONE | |
| Upgrade all machines in S20 to 10G connection | Spencer | Medium | DONE | |
| Camera binning messes up pulse ID finding | Spencer | Medium | DONE |
...