...
- ssh mec-laser
- mecpython
- import meclas
- meclas.YFE.On() Note: Wait several minutes until the E-drives have turned on before proceeding to the next step. The E-drive turn on is confirmed after a series of chimes are heard. If not in the hutch, then the e-drive turn on can be confirmed by opening scope Lecroy A and changing the state of Long Pulse Laser Operation to 10Hz enable. The 10Hz trace will be visible when the E-drives have turned on (provided SHUTTER 4 on the LSS is open).
- meclas.LPL.SHG_opt()
- meclas.LPL.psefc10Hz(numIterQ=50)
This concludes this procedure
...
- Open Lecroy A scope to monitor 10Hz pulse shape
- If trace is not present on Lecroy A, make sure that 10Hz operation is enabled.
- Runmeclas.LPL.psefc10Hz(numIterQ=50) andmeclas.LPL.SHG_opt() after verifying trace is present.