...
- If on a PAMM - set camera to free run
- Send a picture of each camera to the log book
- After complete - reset all camera exposures, motor positions, flippers, etc
- DTOTR2 can stay in the in position
- DTOTR1 should be retracted in y direction (DTOTR1_Y=0)
- LFOV motor should be moved out (to motor position 75)
- CHER wafers should be driven out (hold CW until they are fully retracted, ~25s)
- GAMMA2 screens should be out
- EDC_screen should be out
...