Page History
...
ASIC Power Requirement | Analog Section | Digital Section | 0.6V Sink | Analog TPS | ||||
|---|---|---|---|---|---|---|---|---|
ePixUHR 140k 2x2 Detector | SparkPix-S 500k 2x2 Detector | ePixUHR 140k 2x2 Detector | SparkPix-S 500k 2x2 Detector | ePixUHR 140k 2x2 Detector | SparkPix-S 500k 2x2 Detector | ePixUHR 140k 2x2 Detector | SparkPix-S 500k 2x2 Detector | |
Voltage | 1.3 V | 1.3V | 1.3V | 1.3V | ??? Maybe | 0.6 V | 2.5 V | 2.5V |
Required current | 10A (= 2.5 A* 4 ASIC) | 13.4 A (= 3.35A * 4 ASIC) | - With LVDS transceivers ???? | - With LVDS transceivers ???? | ??? (If existing lower or equal than SparkPixS) | -8 A | 0.4 A (=0.1 * 4) | 0.4 A (=0.1 * 4) |
System Requirement | +1.3 V @ +17.5 A (+30% current safety margin) | +1.3 V @ +3 A (+30% current safety margin) [waiting for the CML number] | +0.6 V @ -11 A (+30% current safety margin) | +2.5 V @ +0.5 A (+30% current safety margin) | ||||
...
FPGA Selection
ePixUHR 140k 2x2 Detector Specs | ePixUHR 1.1M 6x6 Detector Specs | ePixUHR 1M 6x5 Detector Specs | SparkPix-S 500k 2x2 Detector Specs | SparkPix-S 2M 4x4 Detector Specs | KU15P (- |
|---|
A1760) Kintex Ultrascale+ |
|---|
KU15P (- |
|---|
A1156) Kintex Ultrascale+ FPGA USED IN ePixHR250M | KU15P (- |
|---|
E1517) Kintex Ultrascale+ | XCVU160 (-C2104) Virtex Ultrascale | XCVU190 (-A2577) Virtex Ultrascale | VU13P (-A2577) Virtex Ultrascale+ |
|---|---|---|---|
General IO (HD, HP) |
96 HD, |
416 HP |
48 HD, |
486 HP | 96 HD, 416 HP | 52 HD, 364 HP | 0 HD, 448 HP | 0 HD, 448 HP | |
High Speed GTs (GTH/GTY) | - ASIC data: 32 = 8 lanes * 4 ASIC - Spare outputs : 4 - PGP communication: 12 = 12* 160 Gbps/ 275Gbps (1 Amphenol Transceiver) Total: 48 High Speed GTs | - ASIC data: 288 = 8 lanes * 36 ASIC - Spare outputs : 0 - PGP communication: 72 = 12* 1.44 Tbps/ 275Gbps (6 Amphenol Transceivers) Total: 360 High Speed GTs | - ASIC data: 240 = 8 lanes * 30 ASIC - Spare outputs : 0 - PGP communication: 72 = 12 lanes * 1.19 Tbps/ 275Gbps (6 Amphenol Transceivers) Suggested 3 transceivers 1.4x compression in the detector Total: 312 High Speed GTs (If considering 5x2 Modules, 104 GTs each) | - ASIC data: 32 = 8 lanes * 4 ASIC - Spare outputs : 4 - PGP communication: 12 = 12* 160 Gbps/ 275Gbps (1 Amphenol Transceivers) Total: 48 High Speed GTs | - ASIC data: 128 = 8 lanes * 16 ASIC - Spare outputs : 0 - PGP communication: 24* = 12* 495 Gbps/ 275Gbps (2 Amphenol Transceivers) Total: 152 High Speed GTs |
|---|
76 ( |
44 GTH/ |
32 GTY) |
28 |
20 GTH/ |
8 GTY) |
56 ( |
32 GTH/ |
24 GTY) | 104 (52 GTH/52 GTY) | 120 (60 GTH/60 GTY) | 128 (0 GTH/128 GTY) | ||||||||
Total Block RAM | 34.6 Mb | 34.6 Mb | 34.6 Mb | 115.2 Mb | 132.9 Mb | 94.5 Mb | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
UltraRam, HBM | 36 Mb, None | 36 Mb, None | 36 Mb, None | None, None | None, None | 360 Mb, None | |||||
Transceiver Speed (GTH, GTY) | > 10 Gbps | > 10 Gbps | > 10 Gbps | > 10 Gbps | > 10 Gbps | GTH 16.3 Gb/s GTY |
32. |
75 Gb/s Transceivers | GTH 16.3 Gb/s GTY |
16. |
3 Gb/s Transceivers | GTH 16.3 Gb/s GTY 32.75 Gb/s Transceivers | GTH 16.3 Gb/s GTY 30.5 Gb/s Transceivers | GTH 16.3 Gb/s GTY 30.5 Gb/s Transceivers | GTY 32.75 Gb/s Transceivers | ||||
Size | The PCB width is (preferably) 65 mm (2.56’’) | 42.5 x 42.5 mm | 35 x 35 mm | 40 x 40 mm |
|---|
42.5 x 42.5 mm
47.5x47.5 mm | 52.5 x 52.5 mm | 52.5 x 52.5 mm | ||||||
Cost | 6-10 k$ | 5-9 k$ | 6-10k$ |
|---|
6-10 k$
40 k$ | 50-70 k$ | 60-110 k$ | ||||||
Comments | This is fine for the 2x2 Systems. This is fine for the SparkPix-S 4x4 | The number of GTs in this FPGA does not fit any of the cameras we are targetting | This is fine for the 2x2 Systems. For the larger systems we need more than 3 FPGAs |
|---|
This is fine for the 2x2 Systems.
This is fine for the SparkPix-S 4x4This is fine for the 2x2 Systems. | This is fine for the 2x2 Systems (assuming we can fit the real estate). | This is fine for the 2x2 Systems.(assuming we can fit the real estate) |
*Done considering 1% Occupancy instead of maxing out the transceivers
...
Overview
Content Tools