Page History
...
source /cds/group/pcds/dist/pds/rix/scripts/setup_env.sh
traingenerator -s 14000 -b 28 -n 32001 -r 2 -d "burst" -t 910000 >& /tmp/beam.py
periodicgenerator -p 91 910000 91000 -s 0 0 -d '10kHz1Hz' '10Hz100Hz' --repeat 3 1 --notify >& /tmp/codes.py
seqprogram --seq 0:/tmp/codes.py 3:/tmp/beam.py --pv DAQ:NEH:XPM:3
...
The output of "python tools/seqbrowser.py --seq 0:codes.py 3:beam.py --time 2.0" looks like:
Command to view the status of the sequence (note that for this run the simulated-beam event code 284 was running at 10kHz, not the 33kHz in the example above):
| Code Block | ||
|---|---|---|
| ||
rix-daq:~> pvget DAQ:NEH:XPM:3:SEQCODES
DAQ:NEH:XPM:3:SEQCODES 2023-05-22 17:26:52.369
EventCode Description Rate Enabled
272 1 1
273 102 1
274 0 1
275 0 1
276 0 0
277 0 0
278 0 0
279 0 0
280 0 0
281 0 0
282 0 0
283 0 0
284 10206 1
285 0 1
286 0 1
287 0 1
rix-daq:~> |
...
Overview
Content Tools