...
The RC0 and RC1 fibers are fiber lanes 1 and 2 that we normally use to run small ePix detectors (Marietta). The EVR fiber goes back to the chase and connects up to the third channel of the EVR module, as can be seen in Figure 2. The connections for the fibers are summarised in Table 1.
Figure 2. Fiber optical connections for running CSPAD detectors.
Table 1. Fiber connections for the CSPAD setup.
Fiber input name | Fiber to use | Fiber location endpoint |
RC0 | Fiber lane 1 (epix small fiber) | Marietta |
RC1 | Fiber lane 2 (epix small fiber) | Marietta |
EVR | Its own fiber going to the chase | Chase (evr module, see picture) |