Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

TaskStatusAssigned byActively Worked on by...
Larger # buffered BPM data acquisitions (up to 1000 @ 10Hz?)10/7/22: Timeouts in AIDA code should now correctly propagate through, hard-coded low-level timeouts removed. AIDA bufferd acq experience should now match that in SCP - testing neededGlenGeorge, Greg
Asynchronous calls (especially for bufferedacq) from Matlab9/22/22: Implemented and tested for non-BPM objects, code written for F2_bpms needs testing when beam restoredGlenGeorge, Glen
Implement interface to SCP corr plots
GlenGeorge
Multi-device set (and asynchronous status return) on PMDL (and others...?)10/7/22: Implemented, code implementation in MDL feedforward app needs deployment and testing...GlenGeorge
Feedback HSTA bit control (be able to change Feedback → Compute)9/22/22: Implemented and tested ability to write raw HSTA bit values, matlab interface to toggle OFF, Compute, Feedback states written and tested. George to implement cleaner AIDA-level state change interface.GlenGeorge, Glen
Fix AIDA service crashes on VAX (or be able to detect and self correct)9/22/22: Many potential non catching of errors found by George and changes to server-side code made, cannot induce server failures by testing. Need to operational operationally observe to see if fixes are good.GlenGeorge & Greg

...

TaskStatusAssigned byActively Worked on by...
Data collection: have watcher record each GOLD entry and associated data and save to disk
Glen
Make user-facing configuration GUI to examine training data & evaluate performance & tune NN or linear models or manually tweak
Glen
Implement multi-device write commands in AIDA for PMDL data10/7/22: AIDA software written to allow thisGlenGlen

F2_Wirescanner

TaskStatusAssigned byActively Worked on by...
User access to PMT timing & gate widths
Glen
When selecting motor position units option- propagate changes to plot to see centroid of scan in motor units
Glen
Jitter correction for Linac wirescanners in L2 and L39/19/22: Initial tests show buffered bpm acq with ~200 pulses works, initial code implemented, needs testing with beam
10/7/22: AIDA now supports up to 1800 buffered data points
GlenGlen

S20 Configurator

TaskStatusAssigned byActively Worked on by...
Write current IP waist position to a dedicated PV instead of sharing with desired waist position 
Ryan

S20 IP Waist from BPM Jitter (new HLA idea)

TaskStatusAssigned byActively Worked on by...
CreateNeeds writing - can re-use chunks of F2_Wirescanner jitter subtraction code algorithmGlen