...
- Send email to Ken Brobeck requesting:
- Which facility the CPU will boot (e.g. facet, lcls, lcls2, testfac). This indicates the path to the startup.cmd script and the DHCP server.
- MAC Address of the CPU
- The CPU EPICS target architecture (e.g. linuxRT-x86,linuxRT-x86_64,etc)
- create controls infrastructure for a new linuxRT CPU and / or IOC to a specific facility production server.
- includes $EPICS_IOCS/<cpu,ioc> directories
- includes $IOC_DATA/<ioc>/<autosave,autosave-req,restore,iocInfo,archive> directories
- add CPU boot information to the DHCP configuration file, and reboot the DHCP server. Ken will need the following details:
- Which facility the CPU will boot (e.g. facet, lcls, lcls2, testfac). This indicates the path to the startup.cmd script and the DHCP server.
- MAC Address of the CPU
The CPU EPICS target architecture (e.g. linuxRT-x86,linuxRT-x86_64,etc)
- Proceed to Development Step #3
...
- Create the $IOC_DATA directory for your cpu and iocs as follows:
- cd $IOC_DATA
- Create the $EPICS_IOCS cpu and ioc boot directories
- cd $EPICS_IOCS
- mkdir cpu-<area>-<subsystem-prefix><2-digit#>
- mkdir sioc-<area>-<subsystem-prefix><2-digit#>
- Modify your application to add the cpu boot scripts. If your IOC runs on a Shared Platform cpu then modify the SharedPlatform IOC Application :
- add cpuBoot/<faciilti>/<cpu node>/st.cmd
- add any dhcp.config or ethercat xml scripts
- tag and push shared the SharedPlatform tag to production using cram.
- Add ipxe in $TFTPBOOT/LinuxRT/boot/ipxe/<cpu>.ipxe
- note the buildroot version must correspond to the Application buildroot version defined based on the EPICS base version
- Setup cpu directory files
Original Method: (steps 3b and 3c)- cd cpu-<area>-<subsystem-prefix><2-digit#>
- Setup relative symbolic links to the common startup script and EPICS version:.
- ln -s ../common/st.cmd.linuxRT.cpu startup.cmd
- ln -s ../common/bin/<epics base version> epicsSpecificRelease
- Generate the file kernel-module.cmd. This file load kernels modules and drivers: kernel-modules.cmd
for examples click here.
New Method: (steps 3d and 3e) - must be base release R7.0.3.1-1.0 or greater - Automatic:
- createLinuxRTCpu --help
- Manual:
- cd cpu-<area>-<subsystem-prefix><2-digit#>
- Setup relative symbolic like to the TOP of the IOC Application first time only, thereafter use cram to upgrade link.
- ln -s ../../iocTop/<app> iocSpecificRelease
- cp ../template/startup.cmd.linuxRT.cpu startup.cmd
- replace <cpu> with your cpu name
- replace <full path> with the full path to the directory with the cpu boot st.cmd file
copy the ioc startup.cmd script from $EPICS_IOCS/templat- Setup ioc directory files
- cd sioc-<area>-<subsystem-prefix><2-digit#
- for linuxRT running iocsh: cp ../template/startup.cmd.linuxRT startup.cmd
- for linuxRT running cexp: cp ../template/startup.cmd.linuxRT.cexp startup.cm
- cd sioc-<area>-<subsystem-prefix><2-digit#
- copy the ioc startup.cmd script from $EPICS_IOCS/templat
- edit startup.cmd
- replace <ioc> with your ioc name and for cexp replace <facility>
- change path of the EPICS_IOC_APP if your st.cmd file is in a non-standard location.
- cp ../template/screenrc screenrc
- edit screenrc and replace <ioc> with your ioc name
- Setup a relative symbolic link to the TOP of the IOC Application release.
- ln -s ../../iocTop/<app>/<version> iocSpecificRelease
- Modify $EPICS_IOCS/screeniocs – Please note that this is a symbolic link to a CVS file
- cd
- cd <work>
cvs co epics/iocCommon/All/<facility> , where facility is Dev,Prod,facet,acctest- add line for cpu
format: cpu-<area>-<subsystem-prefix><2-digit #> <ts> <ts port #t> <screen host> [ # comment] - add line for each ioc
format: sioc-<area>-<subsystem prefix><2-digit #> cpu-<area>-<subsystem-prefix><2-digit #> <account> [ # comment] - The "comment" field in screeeniocs is optional and must be precede but "#".
- cd epics/iocCommon/All/<facility>/screeniocs
- edit screeniocs
- verify that the file in use has not been modified without being committed.
- cd $EPICS_IOCS/All/<facility> , where facility is Dev,Prod,facet,acctest
- cvs diff -r HEAD screeniocs
- if there are issues, then send email to whoever made the change or to controls-software that you are about to update this file and uncommitted edits will be lost, so please commit your changes to CVS. If you don't get a response, you can either add the changes to CVS in addition to yours or just add yours.
- check out screeniocs from CVS into your work area
- cd
cd <work>
cvs co epics/iocCommon/All/<facility> , where facility is Dev,Prod,facet,acctest- cd epics/iocCommon/All/<facility>/screeniocs
- edit screeniocs
- add line for cpu
format: cpu-<area>-<subsystem-prefix><2-digit #> <ts> <ts port #t> <screen host> [ # comment] - add line for each ioc
format: sioc-<area>-<subsystem prefix><2-digit #> cpu-<area>-<subsystem-prefix><2-digit #> <account> [ # comment] - The "comment" field in screeeniocs is optional and must be precede but "#".
- commit your changes of screeniocs to CVS as follows:
- cvs commit -m "added cpu and ioc blah" screeniocs
- update the screeniocs file in use
- cd $EPICS_IOCS/All/<facility>
- rm -f screeniocs
- cvs update screeniocs
...
- Create script <app>/iocBoot/<facility>/<ioc>/rtPrioritySetup.cmd to set real-time priorities for threads
- Load rtPrioritySetup.cmd from <app>/iocBoot/<facility>/<ioc>/st.cmd
How-to Release a LinuxRT IOC Application:
How-to boot to boot a linuxRT IOC linuxRT IOC from a Linux Host :
- From cpu:
Log - Log onto the host machine for example softegr@lcls-srv01 type the following:
siocRestart <ioc>
How-to boot an IOC from the linuxRT hostT
The following scripts are located under the directory $IOC/common and should be in PATH on the CPU.
- siocStart.sh <ioc> -
starts - starts a specific ioc. However, if the ioc is up nothing will be done
siocStart - , if no ioc is specified all iocs on cpu not already up will be started.
- siocStart.sh - starts all iocs not already running
- iocConsole.sh <ioc> -d (starts the specified ioc, but does not attache to the screen session)
- iocConsole.sh <ioc> -R (graceful reset)
- iocConsole.sh <ioc> -r (fast restart)
- iocConsole.sh --help
How to connect to CPU from a Linux host:
...