Versions Compared

Old Version 19

changes.mady.by.user Henrik Peter Ekerfelt

Saved on

compared with

New Version 20

changes.mady.by.user Elias Gerstmayr

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
DescXPS ControllerMotor nameChannelPositionDesc. position
DSHM


-37000/-500in/out






Laser room

DescXPS ControllerMotor nameChannelPositionDesc. position
HeNe beam blockXPS:LA20:LS24Transport HeNe blockM310 mm/
8 mm		in/out
CW beam blockXPS:LA20:LS24CW laser blockM50 mm/
25 mm		in/out

...

DescXPS ControllerMotor nameChannelPositionDesc. position
USHMXPS:LI20:MC03PB10 M2 Removal StageM10.5 mm / 41 mmin/out (E320 position)
Axicon VerticalXPS:LI20:MC04PB2 Lens VerticalM2

47.4 mm

44.2 mm

Axicon beam center overlaps with beam center
Axicon HorizontalXPS:LI20:MC04PB3 Lens HorizontalM34.899 mmAxicon beam center overlaps with beam center
Axicon zXPS:LI20:MC04PB1 Lens Z Position StageM10Position for Axicon

...

DescXPS ControllerMotor nameChannelPositionDesc. position

Alignment Target Vertical

UP/DOWN

XPS:LI20:MC10PB11 SFQED Target VerticalM10/99

Home position, needed when inserting or retracting OAP assembly. Do not drive to home (0) when MO tower is in IN position.

/Clear position with and without OAP assembly. Moving assembly requires moving out of clear position.

MO Tower Mover IN/OUTXPS:LI20:MC10PB12 SFQED Tower MoverM2-94.83 -93/0

IN position to look at focal spot.


Clear (retracted), also home position, needs to be done before retracting SFQED assembly

OAP Assembly IN/OUTXPS:LI20:MC10PB16 SFQED Assembly RemovalM3114/0

IN position to focus main beam.

Clear (retracted), also home positions, needs MO Tower to move out first, also needs Alignment target to move upwards first

Elliptical mirror/M3 IN/OUTXPS:LI20:MC10PB17 Elliptical mirror moverM4Positive limit switch/negative limit switch + 12 5

Out position. Configuration is 'SetCurrentPositionAsHome',so need to drive all the way to positive limit switch to ensure driven out.

In position. Drive all the way to negative end for IN position.

PB18 Focus Imaging VerticalXPS:LI20:MC10PB18 Focus Imaging VerticalM50Home at current position (0). Motor should not be touched or moved, should be clear in any case.

...