...
How to start gas jet operation
- Verify Fill valve is closed
- Pressurise the regulator to desired operating pressure Check your training! You need course 122 and potentially course 172 or "on the job experience". Do you know what you are doing? If not, ask Christine...
- Close the drain valve
- Open the fill valve
- Turn on the Iota controller
- Set it to use external and one shot.
- Gas jet will now fire once it gets a trigger from the control system- see next section. Note: can also set to internal triggers and adjust using front panel for testing.
| Info |
|---|
How to change rep rate or pulse duration
...