...
The CU is different from the LAT in many respects, so is the software to run it. There is essentially only a single local installation allowing to run the CU, right now, and it resides on the lat-btserver - latbt01 machines/lat-bt04 (spare) machines. Here are some notes about the installation itself, the tests that can be performed, the schema files to be used.
...
No modifications were done or rework on towers during the beam test. During intergration for 1 in the 1 x 4 one TKR connector for cable 7 (between flex cable 7 and the TEM of non-flight TKR, slightly shifted ) slightly offset and we added a connector saver to avoid stress in the cable.
No anomalies or failures were experience over the coruse course of the beam test that would degrade the flight hardware. The fact that CU passed functional tests below demonstrates that.
...
Tests at SLAC were carried out by Carmelo Sgro and Lua Baldini and data reviewed by Eduardo do Couto e Silva and Jana Thayer./
Tests
Here is the list of functional tests we performed as part of the incoming procedure.
...