Page History

...

The CU is different from the LAT in many respects, so is the software to run it. There is essentially only a single local installation allowing to run the CU, right now, and it resides on the lat-btserver  - latbt01 machines. Here are some notes about the installation itself, the tests that can be performed, the schema files to be used.

Tests

Here is the list of functional tests we performed as part of the incoming procedure.

TKR

• Noise and gain measurement (TkrNoiseAndGain.py)
  • Reference run for the TKR module attached to TEM 3: run 700004421 (PASSED)
  • Reference run for the TKR module attached to TEM 2: run 700004435 (PASSED*)

* Note that TKR FM16 (connected to TEM 2) is not filght and it does have its "features" and idiosyncrasies. In particular there are quite a few layers failing in terms of disconnecetd/defecting channels (Y15, X13, Y11, Y10, Y2). A good reference run for comparison (though quite old, now, and take n with a different software version) is:

http://www.slac.stanford.edu/exp/glast/ground/LATSoft/nfsLinks/u30/MC-tasks/beamTestPisa/output/700000107/TkrNoiseAndGain_700000107.html

• Noise occupancy measurement (TkrNoiseOccupancy)
  • Reference run for the TKR module attached to TEM 3: run 700004422 (PASSED)
  • Reference run for the TKR module attached to TEM 2: run 700004436 (PASSED)

CAL 

• Standard CPT (CPT_beamtest.py)
  • Reference run for the CAL module attached to TEM 3: runs 700004423-700004433 (PASSED)
  • Reference run for the CAL module attached to TEM 2: runs
  • Reference run for the CAL module attached to TEM 1: run

Installation

Both the LATTE and the INT releases are installed onto lat-bt01 in

...

depending on the time of collection. 

Tests

Here is the list of functional tests we performed as part of the incoming procedure.

TKR

• Noise and gain measurement (TkrNoiseAndGain.py)
  • Reference run for the TKR module attached to TEM 3: run 700004421 (PASSED)
  • Reference run for the TKR module attached to TEM 2: run 700004435 (PASSED*)

* Note that TKR FM16 (connected to TEM 2) is not filght and it does have its "features" and idiosyncrasies. In particular there are quite a few layers failing in terms of disconnecetd/defecting channels (Y15, X13, Y11, Y10, Y2). A good reference run for comparison (though quite old, now, and take n with a different software version) is:

http://www.slac.stanford.edu/exp/glast/ground/LATSoft/nfsLinks/u30/MC-tasks/beamTestPisa/output/700000107/TkrNoiseAndGain_700000107.html

• Noise occupancy measurement (TkrNoiseOccupancy)
  • Reference run for the TKR module attached to TEM 3: run 700004422 (PASSED)
  • Reference run for the TKR module attached to TEM 2: run 700004436 (PASSED)

CAL 

...