...
- Download the software installer from https://support.automationdirect.com/products/directsoft.html.
- Install the latest version of DirectSoft.
- License Key: QKGD-6L68-Y019-J117
Connecting to the PLC
- Plug HDMI cable into Port 1 (circled) of PLC module.
- USB adapter will be needed to connect to computer.
- PLC must be in terminal mode ("TERM") to transfer changes.
- In the DirectSoft program, go to PLC > Connect...
- If the PLC has never been connected to the computer before, create link.
- Select Link... > Add...
- Select the communications port that the PLC is connected to.
- This may be found in the Device Manager of your computer’s Control Panel
- Select the PLC’s product family.
- Example: DirectLogic205 will be from the DL 0/1/2/4/350 Family
- Select the protocol to use in the communications link.
- SLAC LSS uses K Sequence
- Address: 1
- In the “Select Link…” pop-up window, click on the PLC you are using and press “Select”.
...