...
- Mounting and Connecting to Power
- The C-more touch panel order with come with the touch screen, mounting clips, and a terminal block.
- Use the mounting clips (pictured below) to secure the panel, from the inside, to LSS box door.
- Secure terminal block to back of panel.
- Connect one black wire (GND) from the ground terminal to grounded contact on rack.
- Ground terminal is second from the bottom and will be labelled with the ground symbol.
- Connect one blue wire (power) from the negative terminal to 24V contact on rack.
- Negative terminal is third from the bottom and will be labelled with a minus sign.
- Connecting to the PLC
- Connect HDMI cable from 15-pin port on back of panel to Data Communications Module port.
- Data Communications Module with HDMI cable connected:
- Connect HDMI cable from 15-pin port on back of panel to Data Communications Module port.
- Connecting to Computer
- To upload new code, connect USB Cable from port on back of panel to port on computer.
Installing C-more
- Download the C-more software
- https://www.automationdirect.com/support/software-downloads?itemcode=C-more%20EA9%20Series
- License Key: 7UGA-R9M6-3FKY-6TQV
- Connect to the PLC
...