Confluence will be unusable 23-July-2024 at 06:00 due to a Crowd upgrade.
...
2) A second cause for this problem can be that the calib-dir is not mounted on the mon-nodes anymore. ami will look for the pedestal files here, so it will take a long time until int times out and will start, but w/o the detectors. You can check if that is the case by looking at an ami log file (e.g. for ami0-0) or ssh to a mon-node (daq-HUTCH-monXX) in use and check if you can see the pedestals files in /reg/d/psdm/<hutch>/<expname>/calib/<dettype>/.... If the calib directory is not visible from the mon-nodes, a temporary solution is to use a local version of the calib folder. To do so, copy the calib directory into ~<xxxopr>/tmp_calibdir/<hutch>/<exp>/. This can usually be done from a psana node, but you need to be a member of the xxxopr group to be allowed to write in ~xxxopr directories. Then in the <hutch>.cnf file, edit the ami-opts:
...
And uncomment:
#ami_opts = '-a only -R -L '+plugin_path+'/libtimetooldbd.so -E '+expname+' -c /cds/home/opr/xppopr/tmp_calibdir'
...