Link to current edition: https://docs.slac.stanford.edu/sites/pub/Publications/ASO-2%20Qualification%20Workbook.pdf
Draft of the ASO-2 Workbook below:
AOSD -ASO-2 Qualification WorkbookJuly 26, 2017SLAC-I-040-504-002-00-R001 1-1ASO-2 Qualification WorkbookPrefaceThis workbook liststhe requirements for obtaining the Accelerator Systems Operator 2 (ASO-2) qualification level. Use this workbook to track your progress. You may be trained by any control room operator who is qualified as an ASO-2 or higher. Ask your trainer or supervisor for clarification of anything you don’t understand about this training process or about the training material.Give your completed workbook to your supervisoras part of your ASO-2 qualification assessment.You will be notified when you are qualified as an ASO-2and your training record will be updated.InstructionsTrainee: For all items, reviewthe available documentation that pertains to the subject matter. Next, ask your trainer any questions about the itemslisted.Trainer: After the trainee has demonstrated an understanding of the items at the ASO-2 level, initial the corresponding underlined space.Supervisor: After the trainee has accomplishedall required objectives in this section, complete the corresponding signature blockin each section.Trainee (Print Name):Certification Started (Date):Certification Completed (Date):Accelerator Operations Section Final Approvals (Signature/Date):Operator Supervisor:.EOIC Supervisor:.Operator Supervisor:________________________________________________________________________________EOIC Supervisor: __________________________________________________________________________________AD Safety Office:.Accelerator Operations and Safety Division:.AOSD -ASO-2 Qualification WorkbookJuly 26, 2017SLAC-I-040-504-002-00-R001 1-2Table of Contents1.Safety Training.........................................................................................................1-31.1PPS Certification...........................................................................................................................1-31.2Required Classes...........................................................................................................................1-31.3BAS Training................................................................................................................................1-32.Operating Fundamentals...........................................................................................2-42.1Beam Transport System................................................................................................................2-42.2Beam Dynamics and Parameters...................................................................................................2-52.3Instrumentation and Diagnostics System......................................................................................2-72.4Feedback System...........................................................................................................................2-92.5RF System...................................................................................................................................2-102.6Timing System............................................................................................................................2-112.7Control System Hardware...........................................................................................................2-122.8Beam Containment System.........................................................................................................2-132.9Machine Protection System.........................................................................................................2-142.10Utilities...................................................................................................................................2-152.11Vacuum System......................................................................................................................2-163.Operating Techniques...............................................................................................3-13.1Turning on Systems......................................................................................................................3-13.2Steering Beams.............................................................................................................................3-23.3Operating Feedbacks.....................................................................................................................3-33.4Operating Klystrons......................................................................................................................3-43.5Operating the Timing System.......................................................................................................3-53.6Operating Magnets........................................................................................................................3-63.7Operating BPMs............................................................................................................................3-73.8Using Wire Scanners.....................................................................................................................3-83.9Using Profile Monitors..................................................................................................................3-93.10Using the Control System.......................................................................................................3-103.11Using the ACR Hardware and Software Displays and Controls............................................3-113.12Using the Machine Protection System....................................................................................3-123.13Using the Beam Containment System....................................................................................3-134.Area-Specific Operating Techniques.......................................................................4-14.1A-Line Operating Techniques.......................................................................................................4-14.2LCLS Injector Operating Techniques...........................................................................................4-24.3LCLS Linac and LTU Operating Techniques...............................................................................4-34.4LCLS Undulator, Dump, and FEE Operating Techniques............................................................4-44.5SPEAR3 Injector...........................................................................................................................4-54.6SPEAR3 Ring...............................................................................................................................4-7
AOSD -ASO-2 Qualification WorkbookJuly 26, 2017SLAC-I-040-504-002-00-R001 1-31.Safety Training1.1PPS Certification___Complete at least 7 PPS Qualificationworkbooks.1.2Required Classes___Complete the Limited Radiological Assistant (LRCA) class.Class Date/Time: ___________Completed: ___________1.3BAS Training___Complete the SPEAR BAS and Safety Training Workbook.(SLAC-I-040-504-007-00).Supervisor (Signature/Date):