In this table, the PV Name column defines the user/programming interface with USER_P defined by sensor location, e.g. USER_P=RADF:GUNB:621: for a sensor at location 621 in GUNB, and Aliased internal name is the names used internally but not exposed on screens which reflect the chassis channel labeling and manufacturer's documentation, e.g. P=RADF:GUNB:201: and SENSOR=B for channel B of the chassis at location 201 in GUNB. Each sensor board has two sensors on it, so the readings have an instance 1: and an instance 2:.
| PV Name | Aliased internal name | Description | |||
|---|---|---|---|---|---|
| $(USER_P)1_:RAW | $(P):$(SENSOR)1_:RAW | Raw voltage readback. Channel 1 of RadFET pair. | |||
| $(USER_P)1_:ZERO_VOLTS | $(P):$(SENSOR)1_:ZERO_VOLTS | Raw voltage at 0 accumulated dose. Channel 1 of RadFET pair. | |||
| $(USER_P)1_:DELTA_VOLTS | $(P):$(SENSOR)1_:DELTA_VOLTS | Raw voltage difference, from 0 to now. Channel 1 of RadFET pair. | |||
| $(USER_P)1_:DOSE | $(P):$(SENSOR)1_:DOSE | Accumulated dose. Channel 1 of RadFET pair. Calculated from DELTA_VOLTS, with an equation configured by radiation physicists | |||
| $(USER_P)1_:RAW_STATUS | $(P):$(SENSOR)1_:RAW_STATUS | Sensor status. Channel 1 of RadFET pair. | |||
| $(USER_P)2_:RAW | $(P):$(SENSOR)2_:RAW | Raw voltage readback. Channel 2 of RadFET pair. | |||
| $(USER_P)2_:ZERO_VOLTS | $(P):$(SENSOR)2_:ZERO_VOLTS | Raw voltage at 0 accumulated dose. Channel 2 of RadFET pair. | |||
| $(USER_P)2_:DELTA_VOLTS | $(P):$(SENSOR)2_:DELTA_VOLTS | Raw voltage difference, from 0 to now. Channel 2 of RadFET pair. | |||
| $(USER_P)2_:DOSE | $(P):$(SENSOR)2_:DOSE | Accumulated dose. Channel 2 of RadFET pair. | |||
| $(USER_P)2_:RAW_STATUS | $(P):$(SENSOR)2_:RAW_STATUS | Sensor status. Channel 2 of RadFET pair. | |||
| $(USER_P):COMM:ENABLE TEMP | $(P):COMM:NOT_READY | [A,B,C,D]TEMP | Temperature of the sensor board. | ||
| $(P):COMM:SHUTDOWN | $(P):VERSION | DOSFET controller version | |||
| $(P):ID | DOSFET serial number | $(P):SAVE_SETTINGS | |||
| $(P):GET_DELAY | Readback of pause between applying current and reading voltage | ||||
| $(P):SET_DELAY | Set pause time between applying current and reading voltage | ||||
| $(P):GET_BIAS | Readback bias voltage used between dose readings | ||||
| $(P):SET_BIAS | Set bias voltage used between dose readings | ||||
| $(P):POLLSAVE_TEMPSSETTINGS | Save delay and bias settings in the chassis non-volatile storage. | ||||
| $(P):SET_PERIOD | Dose readback sampling interval setting | ||||
| $(P):BOARD_TEMP | DOSFET chassis main board temperature | ||||
| $(P):POLL_ENABLE | Enable/disable dose readback polling. | $(P):SET_PERIOD | Dose readback sampling interval setting | ||
| $(P):POLL_DELAY | Dose readback sampling interval readback | ||||
| $(P):GATE_POLLING | Counter for seconds since the last dose readback cycle | ||||
| $(P):PROC_A | |||||
| $(P):PROC_B | |||||
| $(P):PROC_C | |||||
| $(P):PROC_D | |||||
| $(P):PROC_TEMPS | |||||
| [A,B,C,D]_READ | Trigger readback for a channel | $(P):A_READ | |||
| $(P):A_TEMP | |||||
| $(P):B_READ | |||||
| $(P):B_TEMP | |||||
| $(P):C_READ | |||||
| $(P):C_TEMP | |||||
| $(P):D_READ | |||||
| $(P):D_TEMP | |||||
| $(P):A1_RAW | |||||
| $(P):A1_[A,B,C,D][1,2]:SET_ZERO_VOLTS | Expert screen, define latest voltage readback as 0 dose | ||||
| $(P):A1_ZERO_TOD | $(P):A1_[A,B,C,D][1,2]:ZERO_TOD_UPDATER | ||||
| $(P):A1_ZERO_TOD_AUTO | |||||
| $(P):A1_ZERO_VOLTS | |||||
| $(P):A1_DELTA_VOLTS | |||||
| $(P):A1_DOSE | |||||
| $(P):A1_RAW_STATUS | |||||
| $(P):B1_RAW | |||||
| $(P):B1_SET_ZERO_VOLTS | |||||
| $(P):B1_ZERO_TOD | |||||
| $(P):B1_ZERO_TOD_UPDATER | |||||
| $(P):B1_ZERO_TOD_AUTO | |||||
| $(P):B1_ZERO_VOLTS | |||||
| $(P):B1_DELTA_VOLTS | |||||
| $(P):B1_DOSE | |||||
| $(P):B1_RAW_STATUS | |||||
| $(P):C1_RAW | |||||
| $(P):C1_SET_ZERO_VOLTS | |||||
| $(P):C1_ZERO_TOD | |||||
| $(P):C1_ZERO_TOD_UPDATER | |||||
| $(P):C1_ZERO_TOD_AUTO | |||||
| $(P):C1_ZERO_VOLTS | |||||
| $(P):C1_DELTA_VOLTS | |||||
| $(P):C1_DOSE | |||||
| $(P):C1_RAW_STATUS | |||||
| $(P):D1_RAW | |||||
| $(P):D1_SET_ZERO_VOLTS | |||||
| $(P):D1_ZERO_TOD | |||||
| $(P):D1_ZERO_TOD_UPDATER | |||||
| $(P):D1_ZERO_TOD_AUTO | |||||
| $(P):D1_ZERO_VOLTS | |||||
| $(P):D1_DELTA_VOLTS | |||||
| $(P):D1_DOSE | |||||
| $(P):D1_RAW_STATUS | |||||
| $(P):A2_RAW | |||||
| $(P):A2_SET_ZERO_VOLTS | |||||
| $(P):A2_ZERO_TOD | |||||
| $(P):A2_ZERO_TOD_UPDATER | |||||
| $(P):A2_ZERO_TOD_AUTO | |||||
| $(P):A2_ZERO_VOLTS | |||||
| $(P):A2_DELTA_VOLTS | |||||
| $(P):A2_DOSE | |||||
| $(P):A2_RAW_STATUS | |||||
| $(P):B2_RAW | |||||
| $(P):B2_SET_ZERO_VOLTS | |||||
| $(P):B2_ZERO_TOD | |||||
| $(P):B2_ZERO_TOD_UPDATER | |||||
| $(P):B2_ZERO_TOD_AUTO | |||||
| $(P):B2_ZERO_VOLTS | |||||
| $(P):B2_DELTA_VOLTS | |||||
| $(P):B2_DOSE | |||||
| $(P):B2_RAW_STATUS | |||||
| $(P):C2_RAW | |||||
| $(P):C2_SET_ZERO_VOLTS | |||||
| $(P):C2_ZERO_TOD | |||||
| $(P):C2_ZERO_TOD_UPDATER | |||||
| $(P):C2_ZERO_TOD_AUTO | |||||
| $(P):C2_ZERO_VOLTS | |||||
| $(P):C2_DELTA_VOLTS | |||||
| $(P):C2_DOSE | |||||
| $(P):C2_RAW_STATUS | |||||
| $(P):D2_RAW | |||||
| $(P):D2_SET_ZERO_VOLTS | |||||
| $(P):D2_ZERO_TOD | |||||
| $(P):D2_ZERO_TOD_UPDATER | |||||
| $(P):D2_ZERO_TOD_AUTO | |||||
| $(P):D2_ZERO_VOLTS | |||||
| $(P):D2_DELTA_VOLTS | |||||
| $(P):D2_DOSE | |||||
| Date/time string when dose was zeroed | $(P):D2_RAW_STATUS |
