Page History

On development for rtems - 4.910.42: Host w/tftp server is lcls-dev1

MVME5500> tftpGet -c134.79.219.49 -s134.79.219.136 -g134.79.219.1 \
-m255.255.252.0 -f/rtems/4.910.42/powerpc-rtems/beatnik/img/netboot.flashimg.bin

For MVME6100:

Example: For a client that has an IP address 172.27.2.179:

MVME6100> tftpGet -c172.27.2.179 -s172.27.8.28 -g172.27.0.1 -m255.255.252.0 -f/rtems/4.910.42/powerpc-rtems/beatnik/img/netboot.flashimg.bin
Network Loading from: /dev/enet0
Loading File: /rtems/4.910.42/powerpc-rtems/beatnik/img/netboot.flashimg.bin
Load Address: 006B7000
Download Buffer Size = 00200000

Client IP Address      = 172.27.2.179
Server IP Address      = 172.27.8.41
Gateway IP Address     = 172.27.0.1
Subnet IP Address Mask = 255.255.252.0

Network File Load in Progress...

Bytes Received =&780860, Bytes Loaded =&780860
Bytes/Second   =&780860, Elapsed Time =1 Second(s)
MVME6100>

MVME5500> go -a4000000
Exception handling initialization done

Welcome to rtems - 4.910.4 2 (PowerPC/PowerPC 7455/mvme5500) on MVME5500-0163
Build Date: 20050506PDT18:52:37

Now BSP_mem_size = 0x1FE00000
BSP_Configuration.work_space_size = 15000
Registering /dev/console as minor 0 (==/dev/ttyS0)

RTEMS bootloader by Till Straumann <strauman@slac.stanford.edu>
$Id: netboot.c,v 1.21 2005/04/26 02:05:03 till Exp $
CVS tag $Name: $
Your CPU Temperature calibration changed or was not initialized...
To calibrate the CPU TAU (thermal assist unit), you must observer the following steps:
1. Let your board stabilize to ambient temperature (POWERED OFF)
2. Measure the ambient temperature Tamb (deg. C)
3. Power-up your board and read the Temperature printed by SMON/FDIAG (Tsmon)
NOTE: use ONLY the info printed IMMEDIATELY after powerup
4. Set the calibration offset to Tamb - Tsmon

Type any character to abort netboot: <press any keyboard character here> 2

Press 's' for showing the current NVRAM configuration
Press 'c' for changing your NVRAM configuration
Press 'b' for manually entering filename/cmdline parameters only
Press '@' for continuing the netboot (BOOTP flag from NVRAM)
Press 'd' for continuing the netboot; enforce using BOOTP
Press 'p' for continuing the netboot; enforce using BOOTP
but use file and cmdline from NVRAM
Press 'm' for continuing the netboot; enforce using NVRAM config
Press 'R' to reboot now (you can always hit <Ctrl>-x to reboot)
Press any other key for this message

Changing NVRAM configuration
Use '<Ctrl>-k' to go up to previous field
Use '<Ctrl>-r' to restore this field
Use '<Ctrl>-g' to quit+write NVRAM
Use '<Ctrl>-c' to quit+cancel (all values are restored)
Use '<Ctrl>-x' to reboot
Boot file (e.g., '/TFTP/1.2.3.4/path', '~rshuser/path' or 'nfshost:/dir:path'):
> afsnfs:/afs/slac:/package/rtems/4.910.42/target/rtems_p3/ssrlApps_p1/powerpc-rtems/beatnik/bin/rtems.ralf
Command line parameters:
> INIT=/boot/g/lcls/epics/iocCommon/ioc-b34-cd09/startup.cmd
Server IP: > 134172.7923.1966.29102
Gateway IP: > 134.79.219.1
My IP: > 134.79.219.49
My netmask: > 255.255.252.0
My name: > ioc-b34-cd09
My domain: > slac.stanford.edu
Loghost IP: >
DNS server 1: > 134.79.111.111
DNS server 2: > 134.79.111.112
DNS server 3: >
NTP server 1: > 134.79.110.75 
NTP server 2: > 134.79.110.10 
NTP server 3: >  134.79.110.9
Use BOOTP: Yes, No or Partial (-> file and
command line from NVRAM) Y-N-P > N
Autoboot Delay: 0_.30secs (0==forever) > 5
CPU Temp. Calibration - (LEAVE IF UNSURE) >

NVRAM configuration updated