...
- Brief Status of 2019 MC production — Bradley
- Brief Status of Trigger simulation — Kyle
- What is still needed?
- Anything holding it up?
- Update on the DQM — Matt
- What is still needed?
- Anything holding it up?
- Decision: Run numbers for 2019. — All
- Minor bug fixes to get Ecal LED calibration to work — Andrea/Maurik
- AOB/Questions
Notes:
- The issue with the L0 DAQ-map turned out to be more than just the map. The detector for L0 and slim-L1 were not implemented correctly.
- Omar: Current version is incorrect because we treat the L0 as 2 different sensors (to make it unique in the DAQ map) to account for the split.
- We need to modify the class to have 255*2 channels. Need to fix the sensor setup and add code to handle these new objects.
- Kyle - Trigger
- Readout chain is OK. Branch 420: all hodoscope. This needs testing/validating, but other than that it is OK.
- Maybe can do some comparisons with the HW output.
- Make plots to test the Hodo output.
- Trigger - need to check the output is "sane".
- Intermediate solution is to make a hybrid 2016/2019 detector. Maurik will produce one.
- DQM:
- Jeremy made some scripts to automate submitting the DQM jobs.
- Web interface will need CC help, they have been busy. Standard JSROOT will be good to start with.
- Run numbers: we will start with 10000 (10k) for the actual running.
- LED Calibration: This runs when specifying -R 8000, but it is really really slow.
- Jeremy: the code can be made more intelligent. Perhaps we don't need to worry about this now.
- We will take data at higher run numbers that may help.
{"serverDuration": 52, "requestCorrelationId": "7a656f42969331b0"}