Agenda:

  1. Brief Status of 2019 MC production     — Bradley
  2. Brief Status of Trigger simulation         — Kyle
    1. What is still needed?
    2. Anything holding it up?
  3. Update on the DQM                             — Matt
    1. What is still needed?
    2. Anything holding it up? 
  4. Decision: Run numbers for 2019.        — All
  5. Minor bug fixes to get Ecal LED calibration to work  — Andrea/Maurik
  6. AOB/Questions

Notes: 

  1. The issue with the L0 DAQ-map turned out to be more than just the map. The detector for L0 and slim-L1 were not implemented correctly.
    1. Omar: Current version is incorrect because we treat the L0 as 2 different sensors (to make it unique in the DAQ map) to account for the split.
    2. We need to modify the class to have 255*2 channels. Need to fix the sensor setup and add code to handle these new objects.
  2. Kyle - Trigger
    1. Readout chain is OK. Branch 420: all hodoscope. This needs testing/validating, but other than that it is OK.
      1. Maybe can do some comparisons with the HW output.
    2. Make plots to test the Hodo output.
    3. Trigger - need to check the output is "sane". 
    4. Intermediate solution is to make a hybrid 2016/2019 detector. Maurik will produce one. 
  3. DQM:
    1. Jeremy made some scripts to automate submitting the DQM jobs.
    2. Web interface will need CC help, they have been busy. Standard JSROOT will be good to start with.
  4. Run numbers: we will start with 10000 (10k) for the actual running.
  5. LED Calibration: This runs when specifying -R 8000, but it is really really slow.
    1. Jeremy: the code can be made more intelligent.  Perhaps we don't need to worry about this now.
    2. We will take data at higher run numbers that may help.
  • No labels