...
- Waiting for beam, you can do things like:
Code Block language py theme Midnight firstline 1 awr mfx
- Insert the (Pop-In-Monitor) PIM-DG1 and PIM-DG2 via the MFX light path MFX section (YAG position on the pull down)
- Prepare a screen to view DG1 (via python viewer, navigate to MfxDg1Yag)
- Set hutch attenuators at 1E-1 (for viewing)
- Take note of the transfocator arrangement (in case you want to take it out), e.g. LU44 used prefocusing lens #2 and lenses 1,5,6.
- When you get access to the beam, it's good to remove the prefocusing lens and open the DG1 slits to 2x2. This will let you center without the lens. Then reinsert. Some repositioning through the lens is okay, but if you have to rep
Can check
monitor on DG1
...