Page History
...
| Anchor | ||||
|---|---|---|---|---|
|
Recovering from errors: restarting AMI (the client)
n XPP or XCS use the "startami" command. This will start a second client if you are not on the main DAQ machine and it will restart the DAQ AMI client if run on the main DAQ machine (after asking for confirmation, so you will need to use a terminal). Should the server side by unhappy, you will need to restart the DAQ.
Troubleshooting the DAQ
Ami does not work: the DAQ is fine after a restart, but I see no updates in ami
...
Overview
Content Tools