Page History

• Log into the host machine and start up an RCE GUI...at CERN:
  • the host machine is:  pddaq-gen02-ctrl0

  • the software lives at: /daq/rce/software.pd/protoDUNE

  • start the gui with:  /daq/rce/software.pd/protoDUNE/rceScripts/rce_talk CERN-100 start_gui

• From the GUI, hit the HardReset button...this sets everything to a known state
  Image Added

• Go to the configuration tab, and set the following values: 
  • DataDpmEmu>EnableTx>True
  • DataDpmHlsMon>0x1 (or 0x2)
  • DataDpmTiming>SwFlush>False
  • DataDpmWib>RxPolarity>True
  • If you want to run in emulation mode (e.g. if you don't have a WIB hooked up), also set:
    • DataDpmEmu>Loopback>True
• Hit the "Write Configuration" button: 
  Image Added
• That's it...you should be receiving data to the DataBuffer...you can tell by going to the "Status" tab...should look something like this:
  
  Image Added

Contact

JJ Russell

russell@slac.stanford.edu