Page History

...

Deliverable	Complete Date	Responsible	Blockers/Issues
eTraveler standards, conventions, best practices documentation. All Camera subsystems must use	5/16/15	Mark/Robert	Consensus from Camera project on core standards
~~eTraveler procedure for mechanical~~ ~~assembly of raft electronics boards~~ ~~(attach coldbars and FPGA heat sink)~~	~~Done 5/4/16~~	~~Robert~~
~~eTraveler procedure for raft electronics~~ ~~board initial testing (bring up board and~~ ~~load firmware. Prep for TS-REB testing)~~	~~Complete 5/23~~	~~Robert~~
Meet with Camera on what RGA snapshots to post for REB boards	5/13	Mark
~~eTraveler procedure for posting RGA~~ ~~results~~	~~Complete TBD~~	~~Mark/Robert~~	~~Coordination with Mark Bostic at SLAC for posting RGA~~ ~~results~~

Deliverable	Complete Date	Responsible	Blockers/Issues
~~Write demo eTraveler procedures to show Walt Innes~~ ~~how eTraveler can be used to monitor and control~~ ~~auxiliary electronics inventory~~	~~Done 4/20/16~~	~~Robert~~
With Walt Innes, plan assembly sequence and eTraveler procedures for ~500 commercial auxiliary electronics parts	Complete TBD (Ongoing)	Robert
Write eTraveler procedures for inventory control of commercial auxiliary electronics parts	6/15	Mark/Robert
Write eTraveler procedures for testing of auxiliary electronics assemblies as needed (e.g. Camera protection system)	Complete TBD	Robert
Consult with SLAC Camera subsystems (Cryo, CBM, Shutter, I&T) on assembly sequences, scope and "load balancing" for writing eTraveler procedures	6/15	Mark/Robert
Plan for Camera operations & maintenance documentation, relationship to eTraveler	7/15	Mark/Robert	Project decision on how suitable eT is for operations and maintenance

...

Deliverable	Complete Date	Responsible	Blockers/issues
ePix100A detector data sheet	5/13	Mark
ePix100A installation guide	5/13	Mark
ePix100A detector ops/api guide	5/13	Mark	Need to know if assembled detector can/will be pre-calibrated (ASIC calibration) and a config database delivered

TID-AIR General Work (??? FTE)

...