...
CTRL | N/A | Magnet Control function, see table 1.5 |
HSTACTRL | N/A | Translate SLC HSTA to individual EPICS records (no longer used) |
HSTA | HSTA | Hardwrare Status bitmask |
CALBDISABLE | N/A | Permit calibrate control function, 1=disable, 0=enable |
FBCK | N/A | Feedback enabled |
OUTOFSERVICE | N/A | B-field is Out-of-Tolernace. |
STDZDIRECTION | N/A | Standardize direction, 0=Up, 1=down |
STDZENABLE | N/A | Permit Standardize control function, 1=enable, 0=disable |
TRIMDISABLE | N/A | Permit TRIM control function, 1-disable, 0=enable |
UNAVAIL- | N/A | 1=unavailable; 0=available |
ONOFFCTRL- | N/A | 1=on/off control; 0=no on/off control |
NOANLGCTRL- | N/A | 1=no analog control ps; 0=analog control ps |
OPTURNEDOFF- | N/A | 1=ps turned off by operator; 0=ps not turned off by operator |
TRIPPED- | N/A | 1=ps tripped; 0=ps not tripped |
IDES | IDES | Desired Control Value (amperes) |
IACT | IACT | Control Value from Hardware (Primary) |
IACTPREVOK | IPRV | Last Good Readback |
IACT.ADEL | ATOL(1) | Standardization Delta |
IDELTAS.C | ATOL(2) | Standardization Fraction |
ICTRL.DRVL | IMMO(1) | Minimum Operating Current |
ICTRL.DRVH | IMMO(2) | Maximum Operating Current |
IDAC | DACV | DAC Readback |
IMON | IMON | Control Value from Hardware (Secondary) |
IRIPL | RIPL | Ripple Current Readback |
...
