...
With both of these services in place any system which supports PXE/network-booting
should be able to gain an IP address, fetch a kernel, and boot without an installed operating system.
PXE uses three distinct network protocols that map to three server processes to perform the installation.
In our case, some of the processes run on lcls-dev1 (LCLSDEV daemon)
PXE and DHCP server runs on host 'dhcp3' maintained by SCCS in LCLSDEV.
To find out more about how our linux server boots up linuxRT, click on the following link:
How does the Linux Server boot up linuxRT?
(a) Dynamic Host Configuration Protocol (DHCP)
PXE uses DHCP to deliver initial network configuration options to client nodes.
The DHCP server supplies the PXE boot plug-in with
(i) IP address
(ii) TFTP server address
(iii) Stage 1 image boot-loader name from which to download and execute the image.
As the supplied PXE installation environments are non-interactive and will unconditionally reinstall a client machine,
we have the client associate its MAC address with a specific OS installation before starting the PXE boot.
The configuration information, in our case, in addition to IP/MAC address, includes a hostname and a pointer to the Master Starupt script in afs for our IOC.
It has an optional root-path variable pointing to the afs area which hosts the boot image that is served via TFTP.
This can be over-ridden as will be seen later.
When the Linux server is rebooted or power-cycled, PXE will attempt the network booting method first
and as a first step it will contact the DHCP server to retrieve the network configuration information.
Hence, every new linuxRT ioc (host) needs to be added to the DHCP server configuration file in afs.
This file is in /afs/slac/service/dhcp-pxe/dhcpd.conf
Note that this DHCP service is intended only for booting embedded devices like our linuxRT servers that are connected to the LCLSDEV and SSRL subnets.
The MAC addresses for such devices must be registered in CANDO and assigned fixed IP addresses.
The IP/MAC address of the primary ethernet that will fetch the linuxRT boot image is defined here.
To add a new host to the DHCP configuration, contact Thuy.
Here's is an example - ioc-b34-bd32:
host ioc-b34-bd32 {
# SuperMicro (INTELx86)
#
hardware ethernet 00:25:90:D1:95:1E;
fixed-address 134.79.218.190;
option host-name "ioc-b34-bd32";
if ( substring( option vendor-class-identifier, 0, 5 ) = "udhcp" ) {
filename "/afs/slac/g/lcls/epics/iocCommon/ioc-b34-bd32/startup.cmd";
option root-path "afsnfs1:/afs/slac:/afs/slac";
}
}
(b) Trivial File Transfer Protocol (TFTP)
...
