...
- Sensor temperature -10C (support plate temperature approx. -20C)
- DAQ boards should be at room temperature at nominal power i.e. approx. +20C
- Three cooling loops for DAQ (FE board support), L1-3 and L4-6 module support plates (no manifold inside vacuum box)
- For 2014 one 8" side flange of the vacuum box is available for cooling lines
- 190W combined maximum heat load on L1-3 and L4-6 cooling
- 100W maximum heat load on DAQ cooling
Links
Hybrid power consumption
...
{"serverDuration": 49, "requestCorrelationId": "9c7b52001307a6e2"}