Page History
...
- different type of detectors can be calibrated simultaneously. Desired types can be selected from the list of currently implemented: CSPAD, CSPAD2x2, Princeton, pnCCD, Tm6740, Opal2000, Opal4000, Acqiris.
- expert level interface is simplified, now it contains buttons only, which show info in the log window (bottom part).
- list of runs can be selected by the run type ("dark" or "all") for detectors ("any", "selected any", "selected all").
- initial list of runs is generated using info about runs and detectors from DB. The list of detectors in DB does not coincide with what is coming from xtc file scan (some of detectors are used for control and their data is not saved in xtc...). When the scan results is available, the information about detectors is taken from this scan. This changes the list of shown runs depending on selection...
2013-12-02 Project Status
To-do
- GUIDark
select commands for specific detectors from the list before deployment
add record to history file
save position and size of the main windows at exit and restore at next launch
auto-create work directory if it is missing
- (/)
plot difference between new and existing dark file
- (/) plot
plot image from any file
- (/) update
update status of buttons at the end of batch job
- GUIFileManager
- begin work on deployment of files for geometry calibration
...
Overview
Content Tools