Page History

...

• deployment of files for geometry calibration
• select commands for specific detectors from the list before deployment
• plot difference between new and existing dark data
• plot image from any file

...

cd <your-favorite-test-directory>/test-CalibManager

sit_setup;

calibman;

What to do next

• Set correct queue which will be used for batch jobs: click on tabs: Configuration -> Parameters, select Queue combo box.
• Click on tab Dark.
• Set Instrument, Experiment, from combo boxes and click on Select button to select Detector(s) from pop-up window.
• Set filter for runs to show using combo boxes to the right from labels Show runs and for detectors

• For runs in the table, which you want to calibrate, click on button Go, relax and wait until button Deploy show-up to the right from button 

• Change validity range if necessary, click on Deploy button.  If everything is ok, it is done!

Known problems and ways around

World is not perfect. Anything may happen during this long workflow. Expert mode sheds light on most of the problems. Here is a list of most frequent problems;

• AFS token is expired for your terminal session. Batch system will complain. Use aklog command.
• work directory is missing... make it manually in accordance with selected or default path in Configuration -> Parameters, Dir work
• job on data from NEH/FEH are submitted to the wrong butch queue psfehq/psnehq. Set appropriate queue.
• DB has a list of sources (detectors) which does not coincide with what is written in xtc file. After job is submitted, check the list of detectors found in xtc scan and check only available detectors.