...
- Width of trigger window in GEM : 12
- Delay from CAL trigger discriminator to TEM trigger primitive formation (GTEM/GCCC/trg_alignment:0-7) : 0
- Delay from TKR trigger discriminator to TEM trigger primitive formation (GTEM/GTCC/trg_alignment:0-7) : 3 to 5 Default value is 5. Measurements range between 3 and 5.
- Stretch width of CAL trigger primitive (GTEM/GCCC/trg_alignment:8-15) : 15
...
- Hold trigger primitive for TEM diagnostic latching of TKR trigger primitive (GTEM/GTCC/trg_alignment:16-23) : 15
- Delays from TKR trigger TACK to shaper hold : 0
- Delays from CAL trigger TACK to shaper hold : 43 to 50 Default value is 45. Measurements range between 43 and 47.
The values shown below are based on the LAT Alignment and we will use these as default for CU tests. Note that this is for the flight configuration B2 that became LAT701 config. TEM diagnostics are not enabled and they will change these values.
...