Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • TKR DAC (range,threshhold) (GTEM/GTCC/GTRC/GTFE/dac)) : (22 to 36, 0)

ACD

  • Width of trigger window in GEM : 12
  • Delay from ACD trigger discriminator to AEM trigger primitive formation (GAEM/GARC/veto_delay) : 0
  • Stretch width of ACD trigger primitive (GAEM/GARC/veto_width): 5

...

  • Stretch width of ACD trigger primitive to AEMXS hitmap data latch (GAEM/GARC/hitmap_width) : 0
  • Delay from trigger to hold (GAEM/GARC/hold_delay): 34

 

...

Important Timing Settings

Recommended values from LAT integration in system clock ticks

  • Width of trigger window in GEM : 12
  • Delay from CAL trigger discriminator to TEM trigger primitive formation (GTEM/GCCC/trg_alignment:0-7) : 0
  • Delay from TKR trigger discriminator to TEM trigger primitive formation (GTEM/GTCC/trg_alignment:0-7) : 3 to 5
  • Stretch width of CAL trigger primitive (GTEM/GCCC/trg_alignment:8-15) : 15
  • Hold trigger primitive for TEM diagnostic latching of CAL trigger primitive (GTEM/GCCC/trg_alignment:16-23) : 8 or 9
  • Hold trigger primitive for TEM diagnostic latching of TKR trigger primitive (GTEM/GTCC/trg_alignment:16-23) : 9: 15
  • Delays from TKR trigger TACK to shaper hold : 0
  • Delays from CAL trigger TACK to shaper hold : 43 to 50

The values shown below are based on the LAT Alignment and we will use these as default for CU tests. Note that this is for the flight configuration B2 that became LAT701 config. TEM diagnostics are not enabled and they will change these values.

...