...

• Use script convertOpticalToStandard.py to produce 2013-10-09-CSPAD-XPP-Metrology-standard.txt and constants for global_center
• Use script procOpticalAlignment.py for quality check and to produce constants look constants for center and tilt
• Use script make_cspad_calib_files.py to produce files for center and tilt
  

Quality check

...

S1=S2, L1=L2 - the 2x1 sides should have equal length and width,
D1=D2 - the 2x1 diagonals should be equal,
dS1 = dS2 (approximately)= dS2  ? (388/185)*dL1 = (388/185)*dL2 - tilt angle should provide consistent deviation for all corners,
dD=0, d(dS)=0, and d(dL)=0 - within precision of measurement.
dz3(um) = 0

...

• All measurements are consistent within precision about 10um
• Angles of 2x1 are in the range from -0.18 to +0.49 degree.
• dz3 Mean and Standard deviation (over all 2x1) um: -4.97 +- 21.39

...

Geometry parameters

center_global/0-end.data (pixel)

...

 0.48293   0.48887   0.32371   0.15130   0.24474   0.05987   0.44941   0.20068  
 0.01316  -0.15924   0.11249  -0.07632  -0.03026  -0.03947  -0.17501  -0.00000  
 0.00263   0.20725  -0.05461  -0.08026   0.03158  -0.07893   0.26908   0.03685  
 0.27835   0.37440   0.18024   0.12040   0.27240   0.09805   0.20919   0.09144  

offset/0-end.data

  0    0  820  820
  0  820  820    0
  0    0    0    0

...