Page History
...
- Use the same orientation as in optical measurement, center is calculated as an average of 4 corner coordinates
- All coordinates in pixels
center/0-end.data
In pixels:
Code Block |
---|
X(pixel): 198.46, 198.05, 311.84, 99.32, 628.17, 629.59, 711.73, 499.58, 198.24, 198.03, 311.37, 98.35, 625.63, 626.78, 711.25, 498.41, 198.16, 198.04, 309.53, 96.76, 626.36, 626.53, 711.73, 499.20, 198.36, 198.02, 309.53, 97.25, 627.67, 627.51, 711.80, 499.15, Y(pixel): 307.49, 95.11, 626.06, 627.17, 513.15, 725.70, 198.75, 198.39, 307.48, 95.10, 625.67, 625.63, 510.49, 723.25, 196.42, 196.40, 307.77, 95.14, 625.26, 624.72, 513.51, 725.92, 199.69, 200.90, 307.76, 95.09, 627.28, 628.36, 512.75, 725.08, 199.95, 199.96, Z(pixel): 0.19, 0.22, 0.42, 0.47, 0.25, 0.48, 0.00, 0.17, 0.42, 0.27, 0.57, 0.65, 0.55, 0.82, 0.32, 0.38, 0.05, -0.17, 0.70, 0.50, 0.63, 1.11, 0.20, -0.06, -0.01, 0.00, -0.12, -0.15, -0.08, -0.09, 0.06, 0.03, |
center_corr/0-end.data
are all zeros
2x1-pair orientation angle (degree) in quads
rotation/0-end.data
Code Block |
---|
0 0 self.pairInQaudOrient =270 [ [ 270, 270, 180, 180, 90,270 90, 180, 180],270 0 0 270 270 180 180 270 270 0 0 [270 270, 270, 180, 180, 90,270 90, 180, 180],270 0 0 270 270 180 180 [ 270, 270, 180, 180, 90, 90, 180, 180], [ 270, 270, 180, 180, 90, 90, 180, 180] ] |
Sensor tilt angle (dergee) from optical measurement
Code Block |
---|
dPhi:
-0.02500, 0.00329, -0.16977, -0.13423, -0.32451, -0.25566, 0.02698, 0.31916,
-0.02369, 0.00461, 0.24123, 0.06686, -0.22574, -0.26358, -0.16712, 0.16513,
-0.03159, 0.01447, 0.00526, 0.33226, -0.17809, 0.10962, -0.26712, -0.19214,
-0.12963, 0.00526, -0.23951, -0.22634, 0.23030, 0.08285, 0.05132, 0.06119,
|
Quads' alignment
...
270 270
|
Sensor tilt angle (dergee) from optical measurement
tilt/0-end.data
for dPhi:
Code Block |
---|
-0.02500 0.00329 -0.16977 -0.13423 -0.32451 -0.25566 0.02698 0.31916
-0.02369 0.00461 0.24123 0.06686 -0.22574 -0.26358 -0.16712 0.16513
-0.03159 0.01447 0.00526 0.33226 -0.17809 0.10962 -0.26712 -0.19214
-0.12963 0.00526 -0.23951 -0.22634 0.23030 0.08285 0.05132 0.06119
|
Quads' alignment
Relative quads' alignment is preliminary done based on cxi80410-r1150, based on DSD image averaged over 100 events,
where the shadow of mechanical parts can be destinguished. In order to lign-up the boarders of this shadow we apply constants:
marg_gap_shift/0-end.data
Code Block |
---|
15 40 0 24
15 40 0 24
0 0 0 0
|
offset_corr/0-end.data
Code Block |
---|
1 -3 0 1
1 1 -1 -1
0 0 0 0
|
All other parameters have their nominal values:
offset/0-end.data
Code Block |
---|
0 0 834 834
0 834 834 0
0 0 0 0
|
quad_rotation/0-end.data
Code Block |
---|
180 90 0 270
|
quad_tilt/0-end.data
Code Block |
---|
0 0 0 0
|
Overview
Content Tools