...
Firstly, you need to obtain a membership in the ilc Virtual Organization (VO), which is sponsored by DESY. This is a VO on the LCG grid. Alternately, you can become a member of the calice VO, but this will only work if your institution is actually a member of this collaboration.
Follow the workflow at https://grid-voms.desy.de:8443/vovoms/ilc/vomrsregister/start.action which will require several rounds of confirmations and emails.
Warning |
---|
Somewhat confusingly, there is another ILC VO run by Fermilab located at https://voms.fnal.gov:8443/vomrs/ilc/vomrs which is on the OSG grid. The two Virtual Organizations are not interchangeable so make sure you get a membership in the DESY one to follow the instructions in this tutorial! |
Setup
Info |
---|
The rest of the tutorial assumes that you are running from an lxplus node at CERN and using the bash shell. |
...
No Format |
---|
mkdir -p ~/.glite/vomses
cd ~/.glite/vomses
wget http://grid.desy.de/etc/vomses/ilc-grid-voms.desy.de
|
Now, the voms-proxy-init command should work correctly.
...